DJI Mini 5 Pro Gimbal Repair – Fix Gimbal Stuck After Crash | Full Disassembly

Learn how to disassemble, inspect, repair, and reassemble the DJI Mini 5 Pro gimbal camera after a crash, stuck gimbal, or calibration error.
Buy tools and parts on AMAZON:
Screwdriver Set: https://hfixt.com/spro
Opening Tool Set: https://hfixt.com/pryt
Magnetic Mat: https://hfixt.com/mat
Tweezers: https://hfixt.com/tzrs
Glue for Electronics: https://amzn.to/4uRo1ei
Glue Gun Kit: https://amzn.to/4993KZz
Hot Glue: https://amzn.to/4nz7R77

Global AliExpress:
Screwdriver Set: https://hfixt.com/alis
Opening Tool Kit: https://hfixt.com/alit
Magnetic Mat: https://hfixt.com/amat
Tweezers set: https://hfixt.com/altz
Glue for Electronics: https://s.click.aliexpress.com/e/_c3YkCESN
Gimbal Parts: https://s.click.aliexpress.com/e/_c3K8yLfn
Camera Module: https://s.click.aliexpress.com/e/_c336V2tn
Gimbal Cable: https://s.click.aliexpress.com/e/_c4FDjAuN
Pitch Motor: https://s.click.aliexpress.com/e/_c3UGsWr3
Yaw Motor: https://s.click.aliexpress.com/e/_c4azJlh3
Roll Motor: https://s.click.aliexpress.com/e/_c3L227id
Lower Bracket: https://s.click.aliexpress.com/e/_c4UdKCVr

📌*Useful links*
Water Damaged Drone Repair: https://youtu.be/NN5JeRZ-FF4
Best Screwdriver Set: https://youtu.be/fdtNem4rDDM
More DIY repair guides: https://how-fixit.com

📱Follow us for more tech tips and guides!
TikTok: https://www.tiktok.com/@howfixit
Instagram: https://www.instagram.com/howfixit/
Facebook: https://www.facebook.com/HowFixit/
X: https://x.com/HowFixit

*Description*
If your DJI Mini 5 Pro crashed and now has a stuck gimbal, gimbal motor overloaded warning, gimbal calibration error, tilted camera, shaking camera, no image transmission, or failed startup self-check, this repair guide will help you inspect and fix the gimbal camera assembly.
In this video, I completely disassemble the DJI Mini 5 Pro gimbal into its main components, including the camera module, roll motor, yaw motor, pitch motor, support brackets, rubber dampers, covers, and gimbal signal cable. You’ll see how to remove the gimbal from the drone body, inspect crash damage, replace damaged internal parts, and reassemble everything correctly.
This guide is useful for diagnosing mechanical gimbal damage, torn flex cables, damaged motors, broken brackets, loose dampers, camera housing damage, and other common DJI Mini 5 Pro crash repair problems. After reassembly, I also show the first test power-on, image transmission check, and DJI Fly gimbal auto calibration.

🎬 Timecodes:
00:00 – DJI Mini 5 Pro gimbal crash repair overview
00:42 – Tools needed for DJI Mini 5 Pro disassembly
01:26 – Power off the drone and remove the battery
01:32 – Remove the upper body cover
03:38 – Disconnect the antenna cable and top shell
04:33 – Disconnect the gimbal signal cable
05:46 – Remove the front sensor module screws
06:15 – Release the gimbal cable adhesive
06:44 – Remove upper gimbal camera mounts
07:00 – Remove the lower body cover
08:26 – Remove lower gimbal dampers
08:38 – Remove the complete gimbal camera assembly
09:06 – Inspect gimbal crash damage
09:32 – Remove gimbal rubber dampers
10:37 – Disassembling the gimbal camera.
12:50 – Remove the camera module
14:25 – Camera module replacement and calibration warning
15:56 – Remove the roll motor section
17:31 – Roll motor replacement symptoms
18:20 – Remove the yaw motor and bracket
19:20 – Yaw motor damage symptoms
20:00 – Remove the pitch motor and bracket
20:19 – Pitch motor crash damage symptoms
21:07 – Remove lower bracket, limiter, and roll bracket
24:04 – Inspect the gimbal signal cable
24:57 – DJI Fly calibration vs professional calibration
25:40 – Start gimbal reassembly
26:55 – Install pitch motor
27:20 – Install yaw motor and cables
28:47 – Install roll motor
29:51 – Reinstall camera housing
30:31 – Install camera module and connect cable
30:55 – Best adhesive for connectors and flex cables
35:13 – Install gimbal rubber dampers
37:47 – Install gimbal camera assembly into drone frame
39:16 – Connect gimbal signal cable to core board
39:42 – Install front sensing module
40:01 – Seat lower rubber dampers
40:37 – Install lower cover
42:19 – Reconnect antenna and install upper cover
43:52 – First power-on test
44:00 – DJI Fly gimbal auto calibration

🌟FAQ:
❓Question: Why is my DJI Mini 5 Pro gimbal stuck after a crash?
✔️Answer: A stuck gimbal is often caused by a bent bracket, damaged motor arm, blocked axis, torn gimbal signal cable, broken rubber damper, or misaligned camera housing after impact.

❓Question: Does replacing the gimbal signal cable require professional calibration?
✔️Answer: Usually, replacing only the gimbal signal cable does not require professional pairing.

❓Question: Do I need DJI Fly calibration after gimbal repair?
✔️Answer: Yes. After reassembly, run gimbal auto calibration in DJI Fly.

AFFILIATE PROGRAM
As an Amazon Associate, I earn from qualifying purchases.

#djimini5pro #dji #howfixit #dronerepair #djirepair

Видео DJI Mini 5 Pro Gimbal Repair – Fix Gimbal Stuck After Crash | Full Disassembly канала How-FixIT