Jeep Wrangler - DIY Off-Road Switch Box Control Panel Wiring Installation Guide

This is a comprehensive diy installation guide How To Properly Add 12VDC Accessory Circuits To Any Vehicle Using A Switch Panel 6 Channel Relay Bus
Buy Switch box here : https://amzn.to/3cvrvh8

Hi! Take a look at this parts List I created on Amazon:
https://www.amazon.com/shop/atemoffroad

Convenient / Neat / Safer
OFFROADROWN 6 gang switch panel system gives the massive space saving with smaller control box. Smaller size can be used on dash panel, center console, overhead sunglasses holder, etc.Suitable for Off-road, Powersports, Marine, Yachat, Trailers, Bus, Heavy-duty Machines, etc. This is the best way to control wires under your hood and adding single panel to control everything. Simplify Your Life.

* Input Voltage: 12V DC
* Maximum Power: 480 - 960W
* Maximum Current: 40A
* Panel Material: High quality ABS
* Panel Size: 3*2*0.7 inch
* Circuit Box Size: 5*3.7*2.8 inch
* Operating Temperature:- 40°C ~ + 100°C
* Reverse polarity protection, overload protection, overcurrent protection, thermal protection

FEATURES

* 6 gang design, control 6 auxiliary LED lights or electrical devices
* Super clean and easy to install, best way to clean up all wiring in your vehicle
* Compact and universal design, fit for all type of vehicles
* All come in one box, no need to buy extra parts

INSTALLATION STEPS

* Park the vehicle on a smooth level surface
* Mount the Switch Panel Screen with brackets onto the chosen position of the driver's cab
* Open the vehicle front cover and mount with the Control Box
* Connect LED lights or any other electrical needed devices to the Control Box
* Connect Control Box with Switch Panel Screen
* Connet the Control Box with power source / battery of the vehicle.

BOX COME WITH

* switch panel
* control box with wiring harness
* 24pcs stickers,
* 6 color coded output wires
* 6 40A relays, 1 30A and 5 20A fuses
* panel bracket
* screws
* replaceable butt splice connectors
* wire splice connector,
* 3M double-sided tape,
* zip ties
* instruction

#offroad #switchbox #wiringguide

More content!
DIY Overland kitchen Tailgate table
https://youtu.be/xpmF-3DPO04
DIY Bolt On Hi-Lift J-Mount Install
https://youtu.be/qk-5IBAiXG4
DIY Front Stubby off-road bumper
https://youtu.be/H6PKaZ97cII
DIY Body Lift
https://youtu.be/cslCQCLDTxY
Jeep front and rear shock replacement
https://youtu.be/uBOeLKoNUjE
Sway bar quick disconnects
https://youtu.be/RbRqhitjRyI
Overland Tool mounting Solutions
https://youtu.be/iE5B2jxzaww
Jeep Tailgate table build
https://youtu.be/MSo88RPHuHs
DIY Jeep Rock sliders
https://youtu.be/4wbmxbeCx64
How To Install cb radio in Jeep Wrangler
https://youtu.be/kLgbYZGRVls
32” tires I’m running
https://youtu.be/KZndi2_vF4M
DIY On board air compressor build
https://youtu.be/5ZGLAp1MJT8
Fuel and water cell mounting Solutions
https://youtu.be/3KwyNjUeLX4
DIY Rear Trail Cargo Rack build
https://youtu.be/NluSecoW_JY
Hi jack hood mounts install
https://youtu.be/1_BfjSsPmAs
Wireless winch controls
https://youtu.be/Hq6uRVHNkkM
DIY Jeep E Fan build
https://youtu.be/NHTIqAjWcno

DISCLAIMER
Due to the factors out of control by ATEM OFFROAD, we cannot guarantee against improper use or unauthorized modifications of this information ATEM OFFROAD assumes no liability or responsibility for property damages or injuries incurred as a result of any information contained in this video. Use this information at your own risk . ATEM OFFROAD recommends safe practices when working on vehicles and or with tools seen in this video, any injury damage or loss that may result from improper use of these tools equipment or from the information contained in this video
Is the sole responsibility of the user and not ATEM OFFROAD. Be Safe
This video and description contains affiliate links which means if you click on one of these product links, I’ll receive a small commission.

Видео Jeep Wrangler - DIY Off-Road Switch Box Control Panel Wiring Installation Guide канала ATEM OFFROAD