How to Install a Carbon Fiber Rear Diffuser on Audi S3 8V
My fellow Audi S3 Fanatics, after a ton of request to create this DIY, I finally found a local subscriber to volunteer his car for the task. A big shout out goes to Steve W. of Orange County for graciously loaning me your S3 and helping with the install. Thomas, at EMD Auto needs the proper credit as he shared with me his experience for a successful and proper installation.
As many of you know, it’s been over a year and a half that I installed my carbon fiber rear diffuser. At the time, I rushed while recording the DIY and did a poor job during the installation. Technique wise, it was also performed improperly. Today’s DIY will focus on the PROPER way to remove your OEM rear diffuser, and replace it with an aftermarket CF one.
There will be four main parts:
- removal of rear brake lamps and trunk interior panels
- removal of the bumper
- removal of the OEM diffuser
- installation of the new CF diffuser
Once the diffuser is successfully installed, you’ll just back track and re-install the bumper and other components. It’s a DIY that’s a bit more challenge, but 100% doable. I highly recommend having at least the rear end up on jack stands, and having a friend help.
If any of you are local to OC and need me to do the work, let me know and I will gladly install it for you! As always, thank you for watching and supporting my channel!
If you also have a vehicle you would like featured on my channel, let’s get together and talk!
Until the next time, this is Peter, The Audi S3 Fanatic!
EMD website: https://www.emdauto.com/
Music: “Dreams” from Bensound.com
Видео How to Install a Carbon Fiber Rear Diffuser on Audi S3 8V канала The Automotive Fanatic
As many of you know, it’s been over a year and a half that I installed my carbon fiber rear diffuser. At the time, I rushed while recording the DIY and did a poor job during the installation. Technique wise, it was also performed improperly. Today’s DIY will focus on the PROPER way to remove your OEM rear diffuser, and replace it with an aftermarket CF one.
There will be four main parts:
- removal of rear brake lamps and trunk interior panels
- removal of the bumper
- removal of the OEM diffuser
- installation of the new CF diffuser
Once the diffuser is successfully installed, you’ll just back track and re-install the bumper and other components. It’s a DIY that’s a bit more challenge, but 100% doable. I highly recommend having at least the rear end up on jack stands, and having a friend help.
If any of you are local to OC and need me to do the work, let me know and I will gladly install it for you! As always, thank you for watching and supporting my channel!
If you also have a vehicle you would like featured on my channel, let’s get together and talk!
Until the next time, this is Peter, The Audi S3 Fanatic!
EMD website: https://www.emdauto.com/
Music: “Dreams” from Bensound.com
Видео How to Install a Carbon Fiber Rear Diffuser on Audi S3 8V канала The Automotive Fanatic
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Remove and Install Mirror Caps on Audi S3 8V, Carbon Fiber Edition8V S3 Exhaust (Milltek Resonated), 4 Piece Intake, APR ECU & DSG Software [+81HP & +93lbfts]My VR6 AUDI A3 gets a MUFFLER DELETE! Time to get LOUD!AutoNarrative - DIY Audi A4 Front Grill Dechroming and Rear Spoiler Makeover on a BudgetMaking a Custom Diffuser!! Subaru BRZAUDI S3 FORJADO 4x4 550cv da Armada Perfomance!AUDI A3/REAR DIFFUSER/ REPLACEMENT/AFTER MARKET 2015Nordschleife Audi S3Best Hack for the QuickJack, only $10!CARBON FIBER Q50 Diffuser Install With Brake Light - Step By StepTrick and technique to wrapping a rear bumper solo (carbon fiber vinyl wrap)Audi Front Bumper Removal DIY on Audi S3DIY: F30 M SPORT Conversion Rear Bumper and M Performance Diffuser on a BMW F30 328FLAT OUT in a 713bhp Audi RS3 Saloon!BMW M140i gets a RIEGER DIFFUSER s/o ML Performance @ DUB CUSTOMS!How to install front splitter rods! PRO TIPS! Ubeymade ~ ep.48DIY Real Carbon Fiber Diffuser! All you need to know$20 Diffuser Fins Install for Rear bumper Carbon Fiber LookAWE SwitchPath (Valved) Exhaust Install + Sound Clips | Audi S3 / Golf RHow to Remove Rear Spoiler and DIY a New One on Audi S3