TrenchIt TCT AG Trencher & Spinning Jenny

Demonstrating the TrenchIt TCT AG Trencher with the new spinning jenny attachment for drainage projects.

The TrenchIt TCT AG Trencher has been designed for use in the drainage of agriculture and horticultural land. It is a 3-point linkage attachment suited to most tractors from 40-60HP with hydrostatic transmission or creep gear box. Tractor mounted trencher attachment.

It is a very efficient way to drain your fields, it works out to be a fraction of the cost of a contractor coming in and doing the work, it can be hooked up to the tractor in a matter of minutes and ready to work!. The TrenchIt TCT AG tencher can be fitted with laser equipment to make the trench levels perfect every time.

ADVANTAGES
- This is a PTO driven trencher.
- Driven via a reduction gearbox and chain drive this allows an optimum digging speed.
- It is designed for tractors with horsepower (HP) from 40 – 60HP with hydrostatic transmission or creep gearbox transmission that does not exceed 0.3 kph or 0.12 miles/hr.
- Low maintenance machine, built to last and made in New Zealand.

FEATURES
- DIGGING DEPTH: Up to 1200mm with various chain options
- DIGGING WIDTH: 150, 200, 250, 300mm
- WEAR PARTS: Quality USA trenching parts, with tungsten carbide cutting teeth.
- SLIP CLUTCH: This protects tractor and trencher from undue shock.
- CRUMBER BAR: Grades trench as you go.
- CRUMBER SHUTE: Feeds pipe as you go.

OPTIONAL EXTRAS:
- SPINNING GENIE: Unwinds pipe and feeds it into crumber shute.
- LASER MOUNTS:Attached to crumber bar for automatic or manual laser control.

Want to find out more? Email us trenchitnz@xtra.co.nz or call Matt Cooney 0800 873 624 (TollFree NZ) or +64 7 578 1612 / 027 289 7101

See our website www.trenchit.co.nz

Видео TrenchIt TCT AG Trencher & Spinning Jenny канала Trench-It New Zealand