Clever way to indicate a square part in a 4 jaw chuck - SUPER EASY !!
This video shows an easy way of indicating the outside of a square part in a 4 jaw chuck without the need to continuously move your indicator. Take a look at this technique. It virtually eliminates the need to re-position the indicator for each side of your part.
Видео Clever way to indicate a square part in a 4 jaw chuck - SUPER EASY !! канала Joe Pieczynski
Видео Clever way to indicate a square part in a 4 jaw chuck - SUPER EASY !! канала Joe Pieczynski
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Get your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!
Stupid Four-Jaw Chuck Tricks
Precision indication on a Lathe ---- DO NOT MISS THIS VIDEO !!
Dialing in a 4-jaw Lathe Chuck
You will throw your die handles away after you watch this !!!
Knurling and a Few Things you Should Know
Thread Depth, Tool Tip Width and Length of Cut NO TRIG NEEDED
Setting lathe tools on center
Machine Shaft From 2000 Lb Stock
Easy and Quick 4-Jaw Set-Up
Grip Stock - How to Access 100% of your Part Perimeter
dialing work off center in a lathe using a 4-jaw chuck
A Simple Chuck Modification to Improve Parallelism of Your Parts
Need to cut a Trepan or Face groove? Check this one out.
The Best Mill Tip You Will Ever Get --WATCH THIS ENTIRE VIDEO--
FACT CHECK: Threading Myth BUSTED !! You'll Find This Interesting......
YOU WONT BELIEVE YOUR EYES !!!!
A 3 Pin Fixture That Does All The Work -- You'll Enjoy This One !!
How to Hold and Bore Out Thin Shims
Indicating Square Stock in a 4 Jaw Chuck