Performing Submodeling in Ansys Mechanical
Submodeling, as the name suggests, is the modeling of a portion of the larger (global) model to capture the effects of refined mesh in a smaller model. This is done to avoid having the whole larger assembly meshed with fine elements.
We use coarse mesh in the global model, as the local features of the submodel do not have any impact on the overall response of the system. We then define a refined submodel with displacement (and temperature) results applied to the submodel. The most common utility of this approach is to refine a critical region or region of interest without solving for the whole model. Another important aspect is to study small changes like adding a fillet. With local design changes come the parametrization of the design which is much easier in the smaller submodel. Apart from this we can model localized non-linearity that might have not been captured in the global model. For free courses offered through Ansys Innovation Courses visit https://www.ansys.com/courses.
Видео Performing Submodeling in Ansys Mechanical канала Ansys Learning
We use coarse mesh in the global model, as the local features of the submodel do not have any impact on the overall response of the system. We then define a refined submodel with displacement (and temperature) results applied to the submodel. The most common utility of this approach is to refine a critical region or region of interest without solving for the whole model. Another important aspect is to study small changes like adding a fillet. With local design changes come the parametrization of the design which is much easier in the smaller submodel. Apart from this we can model localized non-linearity that might have not been captured in the global model. For free courses offered through Ansys Innovation Courses visit https://www.ansys.com/courses.
Видео Performing Submodeling in Ansys Mechanical канала Ansys Learning
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Sub Modelling with ANSYS SpaceClaimSubmodeling in ANSYS 14.5 | ANSYS e-Learning | CAE AssociatesSubmodeling FE Analysis using ANSYSUsing Adaptive Convergence with Ansys MechanicalPerforming Thermal Radiation Between Surfaces Using Ansys MechanicalTecnica de Submodelado en 5 pasos (caso estático)Submodelling in ANSYS MechanicalChecking Initial Contact Conditions Prior to Solving3.- Curso GRATUITO de ANSYS MECHANICAL. CONTACTOS. WORKBENCH.Using Simulation to Change the Frequencies of a Design in Ansys MechanicalTypes of Joints in FEA # Fixed and Translational Joint # Pipe Analysis In ANSYSHow to Utilize Remote Points ProperlyLinking Thermal Results as Input to a Thermal-Stress Simulation in Ansys WorkbenchBolt Pretension using Ansys MechanicalBeam, shell and solid modelling - Ansys Mechanical 2020R2Hoop & Radial Stress correlation of pressure vessel with FEA using ANSYSAdv. Meshing Methods in ANSYS Workbench | CAE Associates | ANSYS e-LearningConnecting Parts of an Assembly Together Using Ansys Mechanical