Tenlog TL D3 Pro Independent Dual Extruder 3D printer review by Benson Chik Double the print speed!
Time to upgrade my 3d printer and in 2020 the Tenlog TL-D3 not only can print 2 different filament or different colour but to print it independently to each other. You can scale up print speed by printing two of the same file at once or have a mirror image printed as per my spiral vase.
Link to buy here : https://amzn.to/3lx8ywa
“As an Amazon Associate I earn from qualifying purchases.”
I bought it for £520 from Amazon UK, I rather buy from Amazon than cheaper China direct as no import tax to worry about and also the after sales care from Amazon.
The D3 PRO is half assembled and medium DIY skill is needed to put together, there is lots of installation video online which will show you how to put it together. I am on the Tenlog facebook group and I found lots of useful information about the software side of 3D printing which is really useful.
Printer is not dead silent but a low huming noise from the fans, definitly better than the 1st gen 3D printer. I managed to set up and start printing within a couple of hours from opening the box and the prints so far is very good.
There are cheaper dual colour/extruder 3D printer out there but this is the cheapest INDEPENDENT dual extruder 3D printer I can find which you can print 2 object at once, there are modification to make it 4 heads on Facebook which I will definitely check out if you need to scale up production of proto types.
Видео Tenlog TL D3 Pro Independent Dual Extruder 3D printer review by Benson Chik Double the print speed! канала Benson Chik
Link to buy here : https://amzn.to/3lx8ywa
“As an Amazon Associate I earn from qualifying purchases.”
I bought it for £520 from Amazon UK, I rather buy from Amazon than cheaper China direct as no import tax to worry about and also the after sales care from Amazon.
The D3 PRO is half assembled and medium DIY skill is needed to put together, there is lots of installation video online which will show you how to put it together. I am on the Tenlog facebook group and I found lots of useful information about the software side of 3D printing which is really useful.
Printer is not dead silent but a low huming noise from the fans, definitly better than the 1st gen 3D printer. I managed to set up and start printing within a couple of hours from opening the box and the prints so far is very good.
There are cheaper dual colour/extruder 3D printer out there but this is the cheapest INDEPENDENT dual extruder 3D printer I can find which you can print 2 object at once, there are modification to make it 4 heads on Facebook which I will definitely check out if you need to scale up production of proto types.
Видео Tenlog TL D3 Pro Independent Dual Extruder 3D printer review by Benson Chik Double the print speed! канала Benson Chik
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tenlog D3 Pro ReviewJGMaker Artist-D Dual Extruder ReviewTenlog TL D3 Pro Independent Dual Extruder3D Printer update By Benson ChikEnder 3 IDEX: DIY Dual Extruder X-Carriage 3D Printer Installation Kit by SEN 3DTenlog TL-D3 Pro 3D Printer, Dual Independent Extruder, Duplicate and Mirror Mode, Print in 2-ColorsHow to set up the Sovol SV04 IDEX 3D printerJG Maker Artist-D - Dual Extruder 3D Printer - Unbox and SetupHow I Updated the Firmware on my Tenlog TL-D3 Pro 3D PrinterReaYou IDEX TL-D3 Pro (TENLOG) - Assembly, Tests & Review3D Printing Our First Car Parts!TENLOG TL-D3 Pro Dual Independent Extruders 3D Printer OverviewTronxy XY3 SE Unboxing and SetupEryone ER20 Unboxing and Review - Initial Impressions of the right out of the box experience.Printing at 800 mm/s on a FDM CoreXY - Can the HevORT do it?Découverte de la Tenlog TL-D3 ProJG MAKER Artist D PRO IDEX 3D Printer - REVIEWFlashforge Creator Pro 2 Review - Unboxing - Calibration - Test Print - Are dual extruders worth it?ANET ET5 Setup and ReviewSnapmaker A350 3d Printer Setup, Print And ReviewRevised: 3D Printing - 13 Things I Wish I Knew When I Got Started