Anet A8 upgrade – metal frame
The original frame of the Anet A8 is not very rigid, which is terrible for print speed and quality of prints. Therefore we will replace the acrylic frame with new metal frame. This means I now can literally double the print speed and get better quality.
As promised here are the basic dimensions and parts you will need.
Parts to print: https://www.thingiverse.com/thing:3401790
30x30 mm extrusions:
http://jindrasykora.com/3030n
http://jindrasykora.com/3030 (Amazon affiliate link)
X-axis - 2X – 260 mm, 320 mm – 1x
Y-axis – 2X – 405 mm
Z-axis – 2x – 465 mm
M6 10 mm bolt – 80x
M6 15 mm bolt – 20x
M6 flange nut – 100x
M3 14 mm bolt 4x – bolts of this specific length are necessary for securing the Y-axis linear rods in place.
You will obviously need more M3 bolts and nut, but you can take these from the original frame.
All of the other parts you can print your self before you take the original printer apart.
Quantity of 3D printed parts:
– Z_axis_corner_bracket - 2x
– Corner_bracket – 6x
– Cable_Holder_3030
– Corner-coupler-flat – 2x
All of the other parts can be printed just once.
Видео Anet A8 upgrade – metal frame канала Jindra Sykora
As promised here are the basic dimensions and parts you will need.
Parts to print: https://www.thingiverse.com/thing:3401790
30x30 mm extrusions:
http://jindrasykora.com/3030n
http://jindrasykora.com/3030 (Amazon affiliate link)
X-axis - 2X – 260 mm, 320 mm – 1x
Y-axis – 2X – 405 mm
Z-axis – 2x – 465 mm
M6 10 mm bolt – 80x
M6 15 mm bolt – 20x
M6 flange nut – 100x
M3 14 mm bolt 4x – bolts of this specific length are necessary for securing the Y-axis linear rods in place.
You will obviously need more M3 bolts and nut, but you can take these from the original frame.
All of the other parts you can print your self before you take the original printer apart.
Quantity of 3D printed parts:
– Z_axis_corner_bracket - 2x
– Corner_bracket – 6x
– Cable_Holder_3030
– Corner-coupler-flat – 2x
All of the other parts can be printed just once.
Видео Anet A8 upgrade – metal frame канала Jindra Sykora
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Anet A8 AM8 Upgrade - part 1 - Frame build](https://i.ytimg.com/vi/MSE7Gt9jKu8/default.jpg)
![The Ultimate ANET A8 Upgrade](https://i.ytimg.com/vi/2k6niOHWw2Q/default.jpg)
![The Anet A8 PLUS is big, cheap and won't catch fire. 3D Printer Review](https://i.ytimg.com/vi/3qlpdI1kTV4/default.jpg)
![Anet A8 Alumínio - Manual Completo](https://i.ytimg.com/vi/eYcHtW4UADk/default.jpg)
![Cheap 3D Printer - Anet A8: Upgrades, Experience & Thoughts](https://i.ytimg.com/vi/2wt1UYoERvY/default.jpg)
![3D printer wobbling solved - mechanical improvement Geeetech prusa i3 mk8, Anet A8](https://i.ytimg.com/vi/G5XpvJxJVaQ/default.jpg)
![Anet A8 Full 24V Upgrade](https://i.ytimg.com/vi/g0bAwOEVSCM/default.jpg)
![Make a Cheap 3D Printer Better - Anet A8 Print Quality Upgrades](https://i.ytimg.com/vi/7SAEUajLPW4/default.jpg)
![Anet A8 3D Printer Bowden Conversion - Double the print speed](https://i.ytimg.com/vi/b_mfxEnOM44/default.jpg)
![tatara metal frame Build and swap from Anet A8](https://i.ytimg.com/vi/Dhi1tD8UoWw/default.jpg)
![Anet A8 3D Printer Essential Upgrades](https://i.ytimg.com/vi/WFVvZkzmm58/default.jpg)
![Anet A8 Journey - Upgrades Part 1](https://i.ytimg.com/vi/zTuL3QYtO7w/default.jpg)
![Anet A8 mod Y axis](https://i.ytimg.com/vi/EqQhL5zN2k0/default.jpg)
![Anet A8 Top 5 safety upgrades](https://i.ytimg.com/vi/k54lsaahLYg/default.jpg)
![Should you be using IGUS polymer bushings?](https://i.ytimg.com/vi/ZGBipbgwgME/default.jpg)
![Conversione Anet A8 ➡ AM8](https://i.ytimg.com/vi/Elz3gdtzDQI/default.jpg)
![Avoid a Fire Hazard - Anet A8 Safety Upgrades](https://i.ytimg.com/vi/MzWVrv4L1R0/default.jpg)
![Build plate adhesion – Skrit, Brim, Raft](https://i.ytimg.com/vi/Cnv8WJ0cfKA/default.jpg)
![Anet A8 AM8 Mod With X Axis Lead Screw First Home](https://i.ytimg.com/vi/u7m7HoM-jcw/default.jpg)
![I MACHINED A 3D PRINTER FROM SCRATCH (NO 3D printed plastic parts)](https://i.ytimg.com/vi/c9XG4z0Y8m8/default.jpg)