USB-C TP4056 Module That Works! | PCB From PCBWAY.COM
Get ten 100x100mm one or two layer high quality PCBs for just $5 plus shipping from sponsor of this video: https://www.pcbway.com
I've modified cheap USB-C TP4056 charging module design to actually make it work and at the same time, to make it easier to solder.
Buying any kind of electronis module with USB-C from Aliexpress is a gamble. There are SO MANY different modules that don't include 5.1kOhm pull-down resistors on CC1 and CC2 pins. Without them, the modules won't work with proper USB-C power supply or computer's USB-C port. They do work with USB-A to USB-C cable, but not with USB-C to USB-C.
In this video I show latest USB-C problem I've encountered and also my modified version of the problematic module. My module was designed to be soldered using regular soldering iron and solder, no need for reflow ovens or solder paste... But flux is necessary!
0:00 Module from Aliexpress
0:45 Sponsored PCBWAY.COM ad
1:26 The problem with original module
2:45 Modification (VERY hard, AVOID!)
3:20 My new board
If you liked the video, please show it and hit the Like-button!
Check out my other videos:
https://www.youtube.com/user/hugatry/videos
Subscribe:
https://www.youtube.com/user/hugatry?sub_confirmation=1
Видео USB-C TP4056 Module That Works! | PCB From PCBWAY.COM канала Hugatry's HackVlog
I've modified cheap USB-C TP4056 charging module design to actually make it work and at the same time, to make it easier to solder.
Buying any kind of electronis module with USB-C from Aliexpress is a gamble. There are SO MANY different modules that don't include 5.1kOhm pull-down resistors on CC1 and CC2 pins. Without them, the modules won't work with proper USB-C power supply or computer's USB-C port. They do work with USB-A to USB-C cable, but not with USB-C to USB-C.
In this video I show latest USB-C problem I've encountered and also my modified version of the problematic module. My module was designed to be soldered using regular soldering iron and solder, no need for reflow ovens or solder paste... But flux is necessary!
0:00 Module from Aliexpress
0:45 Sponsored PCBWAY.COM ad
1:26 The problem with original module
2:45 Modification (VERY hard, AVOID!)
3:20 My new board
If you liked the video, please show it and hit the Like-button!
Check out my other videos:
https://www.youtube.com/user/hugatry/videos
Subscribe:
https://www.youtube.com/user/hugatry?sub_confirmation=1
Видео USB-C TP4056 Module That Works! | PCB From PCBWAY.COM канала Hugatry's HackVlog
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Connect iTag Bluetooth Tag To Home Assistant with ESP32 |@PCBWayRC522 based RFID Reader For Home Assistant, using ESPHome | Sponsored By PCBWAY.COMRotary Encoder Basics (How do they work?) [PCBWAY Sponsored Video]How To Use Foot Pedal With Arduino |PCB FROM PCBWAY COMAVR ISP Programmer Based On CH551G |PCB From PCBWAY.COMCH551G Prototyping Board | PCB FROM PCBWAY.COMImprove USB Microphone Sound With Amplifier | PCB FROM PCBWAY.COMImport PCB Outline From Fusion360 to KiCad |SPONSORED BY PCBWAY COMSimplest USB to Serial Converter To Replace PL2303 | PCB FROM PCBWAY.COMMeasuring Rounded Corners (DIY Radius Gauge) | PCB From PCBWAYCOMVL6180 Time of Flight Sensor |Module From PCBWAY.COM STOREHow To Share PCB Design On PCBWAY.COM (And earn commissions)Can AI Chat Bot Write Arduino Sketches? | PCB From PCBWAY.COMReverse Engineer PCB With KiCAD 7 |PCB FROM PCBWAY.COMMy C8051F350 (24bit ADC) Development Board |PCB From PCBWAY.COM433MHz To WiFi Bridge (Make RF Outlet Smarter) | PCB FROM PCBWAY.comProgrammable Soap Dispenser (HACK) |PCB From PCBWAY.comHow To Find Shorted Component In PCB |Sponsored by JLCPCBImprove 7 Segment LED Display With Simple TrickControl LEDs with RC remote (Servo Signal Decoder) |PCB FROM PCBWAY