Freedom Refill for Canon BCI 3, 5, 6 & CLI 8 & PGI 5 & similar inkjet cartridges
The best method I've found for refilling Canon BCI 3, 5, 6 & CLI 8 & PGI 5 and other similar cartridges. This uses a 60 cc syringe with the nozzle bent at 90 degrees after heating it with a candle. A short piece of vinyl tubing connect the nozzle of the syringe to a short piece of automotive rubber hose that fits very tightly over the outlet port of the cartridge. A piece of plastic tape seals the air vent. Pull hard on the plunger and release slowly multiple times until the tank is nearly full. Tip the cartridge down so that air can escape from the tank while pulling on the plunger and tip it back so the ink will flow into the tank while the plunger is being slowly released. See nifty-stuff.com/forum for additional details.
Видео Freedom Refill for Canon BCI 3, 5, 6 & CLI 8 & PGI 5 & similar inkjet cartridges канала George Wells
Видео Freedom Refill for Canon BCI 3, 5, 6 & CLI 8 & PGI 5 & similar inkjet cartridges канала George Wells
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
GopherHawk works in 19 minutesPatio heater roarsBobcat gets henDucklingsKissFrom MMX to SR-14From MMX to SR-13From MMX to SR-12From MMX to SR-11From MMX to SR-10From MMX to SR-9From MMX to SR-8From MMX to SR-7From MMX to SR-6From MMX to SR-5From MMX to SR-4From MMX to SR-3From MMX to SR-2From MMX to SR-1German refill of BCI 6