6.5 inch SUBWOOFER Speaker Build (for Sound Bar V2) - by SoundBlab
This subwoofer was designed around a down-firing Tang Band 6.5 inch subwoofer driver. It is a ported bass reflex enclosure with the port firing forward. The goal was to have a relatively small and elegant looking subwoofer that can fit into most home environments. This subwoofer can easily be integrated with a pair of stereo speakers or the sound bar project that is also available on the soundblab.net website for purchase.
The subwoofer design includes a plate amplifier that can be set to 2.1 or 0.1 output. This provides you with the ability to then use this subwoofer with any system or other amplified speakers or just set it to 2.1 and connect a pair of stereo speakers. The output of the specified plate amplifier is 30W+30W stereo, and 60W for the subwoofer channel.
When following the build plan for purchase (https://www.soundblab.net/build-plans/), it can easily be built with everyday woodworking tools, and even by someone with beginner woodworking skills. The construction follows butt joints.
When following the build plan, the end result should give you a speaker that will have the following approximate specifications:
Power Output: (Mono) 60 Watts (4 Ohms)
Bass Principle: Ported or Bass Reflex with approximate -3Db of 35Hz.
Approximate Size (W x H x D): 240 mm x 400 mm x 209 mm
Subwoofer BUILD PLAN: https://soundblab.net/build-plans/
Sound Bar BUILD PLAN: https://soundblab.net/build-plans/
Sound Bar & Subwoofer Combo BUILD PLAN: https://soundblab.net/build-plans/
Electronics, Speaker Drivers & Related Parts Used:
- Tang Band W6-1139SIF 6-1/2" Paper Cone Subwoofer Speaker - (US) https://bit.ly/33aUhPF , (EU) https://bit.ly/3dS0Sm2
- 0.5m (2 feet) of speaker wire (14 AWG) - https://bit.ly/2BuKbLc
- Lepai LP210PA 2x30W + 60W 2.1 Channel Mini Plate Amplifier TPA3118 with Power Supply - https://bit.ly/2GbRJb3 , (EU) https://bit.ly/35oQ6Q5 , https://bit.ly/34l92Ac
- Polyester Batting - https://amzn.to/3bJfBhF , (EU) https://bit.ly/3ojxWYE
- Felt/Rubber Stick-on Pads - https://amzn.to/3id20kq
- Electric Wireless Solder Iron 5s Rapid Heating 30W or 50W USB Charging Lithium Battery - Banggood - https://www.banggood.com/custlink/GGvRp7ApUK, Parts Express - https://bit.ly/346drWn
Support SoundBlab:
- Subscribe to my channel - https://goo.gl/EWMSXV
- Become a Patron - https://www.patreon.com/soundblab
- SoundBlab Website and Build Plans - http://www.soundblab.net
Follow me:
- Instagram: https://www.instagram.com/soundblab/
- Pinterest: https://za.pinterest.com/soundblab/
- Twitter: https://twitter.com/soundblabs/
Contribute Subtitles for my videos:
- http://www.youtube.com/timedtext_cs_panel?c=UCxtfOw_wJBqrYn0vsqmt0lA&tab=2
Recommended Gear, Tools, Amplifier Modules, Speaker Drivers, and more...
https://www.amazon.com/shop/soundblab
Music:
Видео 6.5 inch SUBWOOFER Speaker Build (for Sound Bar V2) - by SoundBlab канала SoundBlab
The subwoofer design includes a plate amplifier that can be set to 2.1 or 0.1 output. This provides you with the ability to then use this subwoofer with any system or other amplified speakers or just set it to 2.1 and connect a pair of stereo speakers. The output of the specified plate amplifier is 30W+30W stereo, and 60W for the subwoofer channel.
When following the build plan for purchase (https://www.soundblab.net/build-plans/), it can easily be built with everyday woodworking tools, and even by someone with beginner woodworking skills. The construction follows butt joints.
When following the build plan, the end result should give you a speaker that will have the following approximate specifications:
Power Output: (Mono) 60 Watts (4 Ohms)
Bass Principle: Ported or Bass Reflex with approximate -3Db of 35Hz.
Approximate Size (W x H x D): 240 mm x 400 mm x 209 mm
Subwoofer BUILD PLAN: https://soundblab.net/build-plans/
Sound Bar BUILD PLAN: https://soundblab.net/build-plans/
Sound Bar & Subwoofer Combo BUILD PLAN: https://soundblab.net/build-plans/
Electronics, Speaker Drivers & Related Parts Used:
- Tang Band W6-1139SIF 6-1/2" Paper Cone Subwoofer Speaker - (US) https://bit.ly/33aUhPF , (EU) https://bit.ly/3dS0Sm2
- 0.5m (2 feet) of speaker wire (14 AWG) - https://bit.ly/2BuKbLc
- Lepai LP210PA 2x30W + 60W 2.1 Channel Mini Plate Amplifier TPA3118 with Power Supply - https://bit.ly/2GbRJb3 , (EU) https://bit.ly/35oQ6Q5 , https://bit.ly/34l92Ac
- Polyester Batting - https://amzn.to/3bJfBhF , (EU) https://bit.ly/3ojxWYE
- Felt/Rubber Stick-on Pads - https://amzn.to/3id20kq
- Electric Wireless Solder Iron 5s Rapid Heating 30W or 50W USB Charging Lithium Battery - Banggood - https://www.banggood.com/custlink/GGvRp7ApUK, Parts Express - https://bit.ly/346drWn
Support SoundBlab:
- Subscribe to my channel - https://goo.gl/EWMSXV
- Become a Patron - https://www.patreon.com/soundblab
- SoundBlab Website and Build Plans - http://www.soundblab.net
Follow me:
- Instagram: https://www.instagram.com/soundblab/
- Pinterest: https://za.pinterest.com/soundblab/
- Twitter: https://twitter.com/soundblabs/
Contribute Subtitles for my videos:
- http://www.youtube.com/timedtext_cs_panel?c=UCxtfOw_wJBqrYn0vsqmt0lA&tab=2
Recommended Gear, Tools, Amplifier Modules, Speaker Drivers, and more...
https://www.amazon.com/shop/soundblab
Music:
Видео 6.5 inch SUBWOOFER Speaker Build (for Sound Bar V2) - by SoundBlab канала SoundBlab
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY Speaker buildHow to Make a Kerfed Slot Plywood Box for JBL S3-1224 SubwooferSOUND BAR V2 - Speaker Build - by SoundBlab18 inch dual bass subwoofer design - Dual Bass for DJ Setup & Live Sound SetupการประกอบลำโพงSubwoofer EP00 : ขั้นตอนการทำ ตั้งแต่ต้นจนจบTransmission Line SPEAKER BUILD - by SoundBlabFabrication d'une enceinte acoustique Jean MaurerEpoxy Dovetail Joint Bluetooth Speaker DIYBuilded home theater subwooferSingle 15 '' Bass Subwoofer Cabinet Design - Giant sound 1000wEp. 35 - How to get an amazing Piano Gloss Finish on the Hammer Home Theater SubRestoration old broken abandoned speakers – restore ancient antique speakersMaking A Sound Bar - High Quality SoundWireless Multiroom SPEAKER BUILD - by SoundBlab4" Transmission Line Subwoofer BUILD - by SoundBlabHow to make Down Firing Powered Subwoofer - DIY BuildDIY: Multimedia Bluetooth Boombox SpeakerEp. 34 - DIY subwoofer the HAMMER! Living Room Friendly Home Theater Sub Build.DIY: Portable Bluetooth "SoundBox" SpeakerDIY Subwoofer Build With Music Reactive LED Light