Загрузка страницы

MX5 NA Miata - How to replace your alternator belt

In this video I am going to show you how you can replace the belt that drives your alternator and water pump. This alternator belt is also called the serpentine belt.

If you've already seen my video on how to replace the accessory belt you can skip from 00:50 to 06:40. Sorry for the repetitive content guys but that content was necessary to make this a complete video with all the steps you need to go through in order to replace the alternator belt. I hope this video was still useful!

MX5 NA Miata - How to build your own Cold Air Intake and heat shield:
https://www.youtube.com/watch?v=EsfL9M1pmIE

MX5 NA Miata - How to replace your accessory belt:
https://www.youtube.com/watch?v=IiyK1MYGhNs

Video content:
» 00:00 - Intro
» 00:15 - Get the right belt
» 00:31 - Run the car without the belt
» 00:50 - Remove the intake
» 03:59 - Loosen the power steering pump
» 06:40 - Remove the accessory belt
» 06:57 - Replace it: https://youtu.be/IiyK1MYGhNs
» 07:12 - Jack up the car
» 07:32 - Partly remove the under tray
» 09:04 - Loosen the alternator pivot bolt
» 10:48 - Loosen the alternator
» 11:42 - Tips and tricks
» 12:28 - Check all the pulleys
» 12:58 - Clean the pulleys
» 13:24 - Install the new alternator belt
» 13:50 - Tighten the alternator
» 14:42 - Tighten the alternator pivot bolt
» 15:22 - Reinstall the under tray
» 15:36 - Install the accessory belt
» 16:32 - Tighten the power steering pump
» 18:25 - Belts alignment check
» 18:52 - Install the intake
» 20:49 - Start the car
» 21:43 - Tips and tricks
» 22:21 - Outro

Things you will need:
» New alternator / serpentine belt
» New accessory / auxiliary belt (optional)
» Socket wrench
» 8mm socket
» 10mm socket
» 12mm socket
» 14mm socket
» 14mm deep socket (optional)
» 12mm wrench
» 14mm wrench
» Breaker bar (optional)
» Torque wrench (optional)
» Pliers
» Pipe wrench
» Small flat head screwdriver
» Philips head screwdriver (optional)
» Heat gun (optional)
» Penetrating oil
» Old rag
» Brush
» Jack
» 2 Jack stands

Follow me:
» Website: https://www.MiataMods.net
» YouTube: https://www.youtube.com/MiataMods
» Instagram: https://www.instagram.com/MiataModsNL
» Facebook: https://www.facebook.com/MiataMods
» Twitter: https://www.twitter.com/MiataMods

Legal disclaimer:
All participants in the creation of this video assume no responsibility for the success, failure, or any outcome of any projects or methods used based on our content. This video is created for entertainment purposes only and not intended to be a substitute for professional help or advice. We are simply sharing our opinions and the path we followed that worked for us on the projects we have attempted.

Видео MX5 NA Miata - How to replace your alternator belt канала MiataMods
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
21 августа 2021 г. 20:30:14
00:22:51
Яндекс.Метрика