Materials I Use for Glowforge

Referral link for up to $500 off on your own Glowforge: https://glowforge.us/f/LVUKZGOS
*If you use this link, not only will you will get a discount but I’ll get credits too which would be greatly appreciated by me and my family! :)

If my name doesn't come up (Catherine) try clearing your cookies, or trying from another device. Thanks!

If you happen to use my referral code, please email me at 85thandpine@gmail.com and I will be happy to send you two free SVG files from anything on my Etsy shop. This does NOT include bundled files, only individual files. :)

My Etsy Shop: https://www.etsy.com/shop/85thandPine (Use code SVG15 when you buy 3 or more individual digital files to get
15% off!)

SVG Pins for Glowforge for warped materials: https://www.etsy.com/listing/953325720/svg-pins-for-glowforge-digital-file?ref=shop_home_active_4&crt=1

Material Links:
Smokey Hill Designs: https://smokeyhilldesigns.com/
Woodpeckers (also on Amazon): https://woodpeckerscrafts.com/
Woodworkers Source: https://www.woodworkerssource.com/

Another source for acrylics that I did not mention in the video is CM's Acrylics. I haven't bought from them yet, but hear they are really good. https://cmsacrylics.com/

Settings I use with the materials from Smokey Hill:
1/8" Sapele Plywood:
(CUT) Speed - 160, Full Power, 1 Pass, 0.08 Focus Height
(ENGRAVE) - I use PG settings for medium basswood plywood

1/8" Cherry Plywood:
(CUT) Speed - 135, Full Power, 1 Pass, 0.13 Focus Height
(ENGRAVE) - I use PG settings for medium basswood plywood

1/8" Clear Acrylic:
(CUT) Speed - 140, Full Power, 1 Pass, 0.12 Focus Height
(ENGRAVE) Speed - 545, Power - 70, 1 Pass, Focus Height - 0.12, LPI - 270

1/8" Baltic Birch Plywood:
PG settings from Glowforge work well with this for Medium Basswood Plywood

1/4" Baltic Birch Plywood:
(CUT) Speed - 128, Full Power, 1 Pass, 0.11 Focus Height
(ENGRAVE) - I use PG settings for Thick Basswood Plywood

My Instagram: @85thandpine

My Email Address: 85thandpine@gmail.com

DISCLAIMER: I choose to buy materials other than proofgrade materials. You will need to make sure the materials you use are laser-safe. Per Glowforge, “if you buy from other suppliers you'll need to do some research first to make sure they are laser-compatible. A Glowforge is like a microwave - putting the wrong material in can damage it.” - https://glowforge.com/faq/materials-a...

Thanks for watching my video! Please feel free to comment below, email me, or message me directly with any questions you may have about Glowforge!

About me: I run an online Etsy shop where I sell mostly laser cut goods and files. At first, my business was mainly crochet and knitwear, but I recently pivoted to strictly laser cutting. I really like the infinite possibilities laser cutting brings, and also enjoy coming up with my own unique designs. 😊 Intro Song: I have the rights under a license to use the following song in my intro - Endless Bliss — Sounds Like Sandler. Distributed from www.soundstripe.com

Видео Materials I Use for Glowforge канала 85th & Pine LLC