F51 Whirlpool Cabrio Repair - F51 Whirlpool Fixed - Error Code F51 - Rotor Position Sensor

Fix Repair F51 on Whirlpool Cabrio Rotor Position Senor can be purchased on Amazon Cabrio Washer F51 Fixed.

First press PAUSE/CANCEL once to clear the Fault code from the Cabrio display. If code appears again put it through an automatic diagnostic cycle while you enjoy a nice soothing cup of tea. (Watch The Cabrio Diagnostics Video); This will reveal any stored Fault codes. Then you will be able to better use the repair guide to fix the major malfunction. Now put the tea down and get to work!
Cabrio dU Fault Door/Lid cannot unlock (Stored Fault Code F83)

Is there excessive weight on the lid, such as a basket of laundry that my keep the lock tab from moving back into the lid lock? Excessive weight will keep the lid from unlocking.
Is soap, fabric softener, or anything else keeping the lock from moving back into the lid lock?
The washer control board cannot determine if the lid lock is unlocked. Check lid lock connections to the control and lid lock resistance levels.
Press PAUSE/ CANCEL once to clear the code.
Cabrio F1 Fault Primary Control Failure (Stored Fault Code F60-F68)

The Cabrio's F1 fault flashes when there is a primary control failure. This is a general code saying something within the control has gone wrong. Before you replace the machine control assembly unplug and reconnect all of the wire connections several times to make sure that they are making good contact. If that doesn't work try this link. Control Module part# W10189966
Cabrio F2 Fault Keypad/User Interface Failure (Stored Fault Code F2)

The Cabrio's F2 fault displays when in:
• Diagnostics Test mode if a stuck key is detected.
• Standby mode if there is a user interface mismatch. More Information Cabrio F40 Fault ATC Thermistor Open/Short (Stored Fault Code F40)

The Cabrio's F40 fault code flashes on the washing machine's display when the washer control detects an open or shorted ATC Thermostat. The ATC Thermostat is located on the washing machine's water valve.

Washer Diagnostic Modes and Tests
Cabrio F41 Fault Motor RPS Thermistor Open/ Shorted (Stored Fault Code F41)

The Cabrio's F41 fault code flashes only during diagnostic testing on the washing machine's display if the motor rotor position sensor (RPS) thermostat is detected as open or shorted by the washing machines control.
Cabrio F50 Fault (Stored Fault Code F50) Motor Stalled

The Cabrio's F50 fault code flashes on the washing machine's display when the
motor rotor position sensor (RPS) senses no rotation.

Does the Cabrio's inner wash basket turn freely?

Remove the inner tub and look for objects that may be keeping the tub from moving freely, like a sock or small towel.

Check all RPS connections for good contact.

See Cabrio Washer Motor diagnostic Tests
Cabrio F51 Fault (Stored Fault Code F51)

The Cabrio's F51 fault code flashes on the washing machine's display when there is a motor rotor position sensor (RPS) failure.

Check for good contact at the control Board and at the RPS. Sometimes disconnecting and reconnecting the RPS plug connection several times will clean off corrosion that may be affecting the contacts.
Cabrio F52 Fault (Stored Fault Code F52)

The Cabrio's F52 fault code flashes on the Cabrio's display when the motor rotor position sensor (RPS) senses rotation after a stop command.

See Cabrio Washer Motor diagnostic Tests
Cabrio F53 Fault (Stored Fault Code F53)

The Cabrio's F53 fault code flashes on the washing machine's display when the washing machine control detects a high temperature at the motor.

Does the inner wash basket turn freely?

If not, determine the cause of friction.
Cabrio F54 Fault (Stored Fault Code F54)

The Cabrio's F54 fault code flashes on the washing machine's display when the Washing machine control detects high current at the washer's motor.

Does the inner wash basket turn freely?

If not, determine the cause of friction.
DISCLAIMER - DISCLAIMER - DISCLAIMER

Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.

Видео F51 Whirlpool Cabrio Repair - F51 Whirlpool Fixed - Error Code F51 - Rotor Position Sensor канала BundysGarage