porter cable nailer trigger assembly air leak remove install FN250C
Disclaimer: Use this video at your own risk. The information contained herein should not be used as a substitute for the advice of an expert or manufacturer. It is for informational purposes only. I did not guarantee I followed any set instructions from the manufacturer. I do not guarantee that it will work for you or that you will not break something. I do not guarantee that working on your product will void any manufacturer warranties.
This is how I fixed my FN250C porter cable trigger assembly. It was leaking air through one of the o-rings, most likely the yellow ring that feels like a soft rubber band. I recommend replacing the entire part instead of trying to track down the 5 separate o-rings. I bought on amazon/ebay, but there are other online resources. You will need to track down the part number by referencing the model number - some models will have the same part. Also, some parts will be replaced by new parts and numbers, so the numbers might not match up.
I did NOT disassemble the new part for fear of destroying the yellow o-ring in the back. On the old part it was soft and came apart quickly which means that air could pass by it.
The part number i bought for this particular install:
Porter Cable 64762000 Trigger Valve Assembly
https://www.amazon.com/Porter-Cable-64762000-Trigger-Assembly/dp/B00XE69LLQ/
The vendors come and go , so this link might not work in the future.
Видео porter cable nailer trigger assembly air leak remove install FN250C канала Karl ale
This is how I fixed my FN250C porter cable trigger assembly. It was leaking air through one of the o-rings, most likely the yellow ring that feels like a soft rubber band. I recommend replacing the entire part instead of trying to track down the 5 separate o-rings. I bought on amazon/ebay, but there are other online resources. You will need to track down the part number by referencing the model number - some models will have the same part. Also, some parts will be replaced by new parts and numbers, so the numbers might not match up.
I did NOT disassemble the new part for fear of destroying the yellow o-ring in the back. On the old part it was soft and came apart quickly which means that air could pass by it.
The part number i bought for this particular install:
Porter Cable 64762000 Trigger Valve Assembly
https://www.amazon.com/Porter-Cable-64762000-Trigger-Assembly/dp/B00XE69LLQ/
The vendors come and go , so this link might not work in the future.
Видео porter cable nailer trigger assembly air leak remove install FN250C канала Karl ale
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Finish Nailer Not Firing - Trigger Valve Replacement FixClavadoras Neumaticas - Marzola e HijosPorter Cable FN 250How to Install an Overhaul Kit on a Porter Cable Nail GunPorter Cable Nailer Repair - How to Replace the O-RingBest air stapler gun.Porter Cable Nailer Fix for trigger issues DA250C FN250CHitachi air nailed air leak fix.Repairing a Framing NailerCOMO REPARAR CLAVADORA NEUMÁTICA CALIBRE 18How to Install a Driver Maintenance Kit on a Porter Cable Nail GunAir Compressor Stopped Working? Watch This Video To See How To Fix It.PORTER-CABLE Pneumatic Nailers & StaplersPorter Cable FN250A repairHitachi NR90AE (update)my porter cable framing nailer broke the other day. Let's see if we can fix it.Porter Cable PIN138 23 Gauge 1 3/8" Pin Nailer First ImpressionsPneumatic StaplersREPARACIÒN CLAVADORA NEUMÀTICA, FUGA DE AIRE POR TAPA SUPERIORno signal,need adjust DVR output solution