A Frigidaire Unimatic only a fool would love
There are many, many videos on YouTube of Frigidaire Unimatic washing machines (including some from myself), but this one tells a story.
This Unimatic came from the Dallas/Ft.Worth area to Iowa back in the fall of 2008. Before she arrived in Waterloo, I already knew it had a hole in the tub, but the machine looked especially minty otherwise. Upon arrival I quickly learned that the minty state of the machine was more than likely due to a broken torque spring, which would have caused the machine to be shoved into a corner early in life.
With a little help from some great friends (unimatic1140, gansky1, and roto204), a trip to Omaha in November of 2008 cured most of the mechanical issues, but we discovered that the pump seal wasn't up to snuff after 50 years of sitting dormant in Texas. Due to an on-going home renovation I put the '56 project off for a rainy day, which just happened to come along last week. I changed out the pump seal on the old lady. She finally has a new lease on life.
This video was a first for many things, including different lighting and camera techniques. While not perfected, I'm trying with each project. I'm not sure when the next one will come, but it will someday.
Until then, enjoy the film. It was certainly one of the more fun projects I've been able to piece together.
For more automatic washer fun, please visit http://www.automaticwasher.org
Видео A Frigidaire Unimatic only a fool would love канала swestoyz
This Unimatic came from the Dallas/Ft.Worth area to Iowa back in the fall of 2008. Before she arrived in Waterloo, I already knew it had a hole in the tub, but the machine looked especially minty otherwise. Upon arrival I quickly learned that the minty state of the machine was more than likely due to a broken torque spring, which would have caused the machine to be shoved into a corner early in life.
With a little help from some great friends (unimatic1140, gansky1, and roto204), a trip to Omaha in November of 2008 cured most of the mechanical issues, but we discovered that the pump seal wasn't up to snuff after 50 years of sitting dormant in Texas. Due to an on-going home renovation I put the '56 project off for a rainy day, which just happened to come along last week. I changed out the pump seal on the old lady. She finally has a new lease on life.
This video was a first for many things, including different lighting and camera techniques. While not perfected, I'm trying with each project. I'm not sure when the next one will come, but it will someday.
Until then, enjoy the film. It was certainly one of the more fun projects I've been able to piece together.
For more automatic washer fun, please visit http://www.automaticwasher.org
Видео A Frigidaire Unimatic only a fool would love канала swestoyz
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Unimatic in HD - first pass with the T2iWhirlpool Gold - Whites (by request)Fun while at Robert Wash-In on May 15, 2010!The Washers We Love and MoreLavadora whirlpool no lava no prendeFull Cycle of the Vintage 1955 Frigidaire Unimatic Automatic WasherKetchup Test: 1952 Frigidaire Unimatic WasherFrigidaire final spin with Rapid-Dry 1000 RPMAdmiral Belt Drive Washing Machine - Large Load of ClothesDO NOT THROW THE OLD WASHING MACHINE ( full automatic machine )1952 Frigidaire WO-65-2 Unimatic1957 Maytag 740C in operation1963 GM Frigidaire Custom Imperial Washer세탁기 돌리기 Inside Washing Machine feat. 삼성 세탁기 SEW-MV100 [20191230]1967 Speed Queen A78F Washer - first test runGM Frigidaire 1-18 Washer!Magic Chef 20 pound washing machine - Medium load, with fabric softener dispenserTop8 premium modificada.Most Satisfying Cleaning Machines and Ingenious ToolsHow to Make a WASHING MACHINE using Buckets (12V Portable)