How to use Infinity CM2 to flash pac.sc or pac file to SPD

Download links & Text format @ https://forum.hovatek.com/thread-21785.html
This video explains how to use Infinity Chinese Miracle II to flash .pac or .pac.sc files (stock rom) to a Spreadtrum Android device

CM2 requires a hardware dongle. Ensure to only flash firmware for your model.

Drop a comment below if you have questions or reach out to us on the following platforms:

Website: https://www.hovatek.com
Facebook: https://www.facebook.com/hovatek
Twitter: https://twitter.com/hovatek
Google+ : https://plus.google.com/+Hovatek

00:10
In this video tutorial, I'll be explaining how to flash a Spreadtrum Android phone using Infinity box CM2 SPD.

00:20
Now, for you to flash your Spreadtrum phone, you're going to of course need the box and the .pac or .pac.sc

00:29
which you want to flash. Now, this is the CM2 SPD software which you'll later install

00:37
and this is the pac file / format which you can flash with any tool. This is the pac.sc format

00:54
which you flash with only Infinity box. Install the Infinity CM2 SPD. Have the dongle connected to your PC.

01:07
[installing CM2 SPD] Before I forget, you need to install Spreadtrum drivers. We have a guide at the Forum

01:22
on how to install Spreadtrum drivers to your PC. Follow that guide, see the video, install drivers if not this

01:29
is not going to work because drivers enable your phone and the PC communicate.

01:35
Now, I've installed the CM2 SPD. I'm going to go ahead to launch it. This often takes a while so be patient

01:52
while the Infinity box CM2 SPD dashboard comes up. Alright! The dashboard is up. [re-positioning]

02:42
Now click CPU (under Settings), select your phone's chipset. We have a guide on how to find out the chipset

02:51
so check out our Forum for that guide. Next, click the Flash tab then click the PAC button.

03:01
A Window should popup. In this Window, navigate to the location where you have your pac or pac.sc file.

03:15
I should mention that the pac.sc is a dump which is exclusive to Infinity box so you can only flash

03:21
that back using Infinity box but the .pac format can be flashed using any Spreadtrum flash tool

03:27
like Miracle box, Research Download, Upgrade Download and any other SPD flash tool.

03:35
What I have here are both the .pac and .pac.sc format. We have a guide on how to convert .pac.sc to .pac file.

04:05
I think I'll just select the pac format since that is more universal. Once you select the pac or pac.sc

04:17
depending on which you have, you click on Open. Chinese Miracle 2 SPD will read the firmware's details

04:27
then you can go ahead to click on Flash. (red text). You'll see ====Wait for phone..Now, power off the phone,

04:45
still with battery inside, hold the volume down button then connect it to the PC. You should have detection.

04:52
[phone detected] Next up, you should have the partitions flashing [flashing]. It might

05:34
take a while because of the system partition which is usually heavy. [pausing video recording] Alright!

05:58
and I have Elapsed with the time it took. Now you can disconnect and power up the phone.

06:04
That's how to flash a Spreadtrum pac.sc or pac file to a Spreadtrum Android phone using

06:11
Chinese Miracle II SPD module.

Видео How to use Infinity CM2 to flash pac.sc or pac file to SPD канала Hovatek