📺 How to Put / Install OpenView – Quick Guide

Many people ask how to set up OpenView (OVHD) properly — here’s a simple breakdown to help you get started!

✔️ 1. Connect the Decoder
• Plug in your OpenView decoder to your TV using HDMI or AV cables.
• Connect the power supply.

✔️ 2. Connect the Dish Cable
• Make sure your dish is aligned to IS20 satellite.
• Connect the LNB cable to the OVHD decoder “LNB IN” port.

✔️ 3. Switch On & Scan
• Power up the decoder
• Go to Menu → Installation → Scan
• Let it complete the channel search.

✔️ 4. Activate Your Decoder
• Dial 1206843#
• Follow the prompts for activation
OR
• Use WhatsApp by sending “Hi” to OpenView support.

If the signal is low or channels don’t load, it’s normally a dish alignment issue.

Need help installing OpenView in Pretoria or Centurion?

Fast • Reliable • FREE Call Outs 📡💪

Видео 📺 How to Put / Install OpenView – Quick Guide канала Piet Dstv Installers