Restoration Old Rusty Fretsaw

Hello folks! Today I want to show you my new restoration project. I found this old rusty fretsaw at flea market.  I didn't have such a tool, so I bought it.

0:00 Review
0:12 Disassembling
1:49 Rust Remover
2:26 Washing
2:41 Drying
3:03 Brushing
3:19 Correction
3:56 Pin
4:22 Handle
5:42 Impregnation
6:34 Pin hole
6:49 Gluing
7:20 Clamps
7:20 Assembly
7:45 Final review
8:04 Test
9:50 Surprise

Restoration process:
I took the fretsaw apart, and the handle was very old. I put all the parts in the rust removal fluid. Then, with the help of a brush, I removed the dark plaque and corrected the details with a file. The saw itself was straightened on the anvil with a hammer.
I decided to make the handle out of beech. At the end of working on a wood lathe, I noticed that there are several holes in my work piece, but not deep ones. I decided to leave it, because if I killed it, I would spoil the size of the blank. The wood was soaked with homemade wax. The fretsaw ring is made of aluminum. As usual, I made a test for you. I hope you like it. Thanks for your attention!

Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: https://www.patreon.com/Screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: https://www.facebook.com/scresandtools/
Instagram: https://www.instagram.com/screwsandtools/

#screwsandtools #fretsaw #restoration

Видео Restoration Old Rusty Fretsaw канала Screws And Tools