Two Tone Paint Job – Learn How To Mask for Two Tone Graphics- Do It Yourself
Visit http://www.learnautobodyandpaint.com/ for the BEST Training on How To Paint A Car!
Join the LearnAutoBodyAndPaint VIP here: http://www.learnautobodyandpaint.com/vip-offer/
Read the Blog: How to Mask for Two Tone Graphics – Two Tone Paint Job:
http://www.learnautobodyandpaint.com/how-to-mask-for-two-tone-graphics/
Hey it’s Tony here… Thanks for watching this video and checking out the blog today.
In this video, I will show you a tank that I’m taping up with graphics. I’ll show you some of the steps on how to mask for two tone graphics.
I did the graphic with a fine-line tape. It’s this blue tape that is very moldable. It is available in different length and width. You can do a lot of graphics with it like flames.
So, the first step I did was to line out the graphic. Then, cover it with painter’s tape and cut it with a razor blade. The covered part will stay silver.
Then, I’m going to do a green base coat on top of the silver. It’s just like the 2013 or 2014 Green Camaro.
I painted the whole tank silver because I want to give it a nice under base coat. So the green color will pop even more than just painting over primer or a darker color.
The graphic is all done on one side then I have to do the same with the other side.
When I’m all done with taping up, I’ll mix my green paint and base coat the whole tank.
I get asked this question a lot, “Hey, Tony, I’m doing base coat right now on my car and I see dust in it. What should I do?”
If you see what looks like dust stuck in the base coat, scuff it with a piece of sand paper. But make sure it’s dry. You have to wait for twenty to thirty minutes for it to dry before you scuff it.
Make sure to use a 600-grit or 800-grit sand paper and scuff it in a circular manner. But don’t push hard.
Then, tack the entire tank down. You need to tack in between base coats if you have a lot of overspray, which you do most of the time.
On another piece of the bike, I will tape up another graphic for the number at the back.
And that’s it for now. I hope you learned a lot. If you want to learn more, go to LearnAutoBodyAndPaint and download your FREE 85-Page Auto Body Manual. Also, check out the blogs and you’ll get useful information for your projects.
Find out more about the LearnAutoBodyAndPaint VIP Course today. We’ve been training thousands of people from all over the world and they’re really enjoying the course.
Don’t forget to please Like, Share or Comment below the video.
Talk to you soon! Have a great day!
-Tony
Join the LearnAutoBodyAndPaint VIP Here: http://www.learnautobodyandpaint.com/vip-offer/
Get A 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: http://www.learnautobodyandpaint.com/
Connect on Facebook for More FREE Updates: https://www.facebook.com/learnautobodyandpaint
Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts
Shop Here:
http://www.learnautobodyandpaint.com/shop/
Видео Two Tone Paint Job – Learn How To Mask for Two Tone Graphics- Do It Yourself канала LearnAutoBodyDIY
Join the LearnAutoBodyAndPaint VIP here: http://www.learnautobodyandpaint.com/vip-offer/
Read the Blog: How to Mask for Two Tone Graphics – Two Tone Paint Job:
http://www.learnautobodyandpaint.com/how-to-mask-for-two-tone-graphics/
Hey it’s Tony here… Thanks for watching this video and checking out the blog today.
In this video, I will show you a tank that I’m taping up with graphics. I’ll show you some of the steps on how to mask for two tone graphics.
I did the graphic with a fine-line tape. It’s this blue tape that is very moldable. It is available in different length and width. You can do a lot of graphics with it like flames.
So, the first step I did was to line out the graphic. Then, cover it with painter’s tape and cut it with a razor blade. The covered part will stay silver.
Then, I’m going to do a green base coat on top of the silver. It’s just like the 2013 or 2014 Green Camaro.
I painted the whole tank silver because I want to give it a nice under base coat. So the green color will pop even more than just painting over primer or a darker color.
The graphic is all done on one side then I have to do the same with the other side.
When I’m all done with taping up, I’ll mix my green paint and base coat the whole tank.
I get asked this question a lot, “Hey, Tony, I’m doing base coat right now on my car and I see dust in it. What should I do?”
If you see what looks like dust stuck in the base coat, scuff it with a piece of sand paper. But make sure it’s dry. You have to wait for twenty to thirty minutes for it to dry before you scuff it.
Make sure to use a 600-grit or 800-grit sand paper and scuff it in a circular manner. But don’t push hard.
Then, tack the entire tank down. You need to tack in between base coats if you have a lot of overspray, which you do most of the time.
On another piece of the bike, I will tape up another graphic for the number at the back.
And that’s it for now. I hope you learned a lot. If you want to learn more, go to LearnAutoBodyAndPaint and download your FREE 85-Page Auto Body Manual. Also, check out the blogs and you’ll get useful information for your projects.
Find out more about the LearnAutoBodyAndPaint VIP Course today. We’ve been training thousands of people from all over the world and they’re really enjoying the course.
Don’t forget to please Like, Share or Comment below the video.
Talk to you soon! Have a great day!
-Tony
Join the LearnAutoBodyAndPaint VIP Here: http://www.learnautobodyandpaint.com/vip-offer/
Get A 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: http://www.learnautobodyandpaint.com/
Connect on Facebook for More FREE Updates: https://www.facebook.com/learnautobodyandpaint
Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts
Shop Here:
http://www.learnautobodyandpaint.com/shop/
Видео Two Tone Paint Job – Learn How To Mask for Two Tone Graphics- Do It Yourself канала LearnAutoBodyDIY
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Prepping Your Car Before Clear | How To Paint Over Chrome | Spraying Single Stage | Autobody Q&A](https://i.ytimg.com/vi/1CPLb7N4OYk/default.jpg)
![Spraying Candy Paint On Car | When To Apply CLEARCOAT (Second and Third Coat) - more Autobody Q&A](https://i.ytimg.com/vi/NARmG9zodqs/default.jpg)
![Car Sanding Tips | How To Apply Basecoat Over Epoxy | Clearcoat and Flowcoating - Autobody Q&A](https://i.ytimg.com/vi/7Ffh0-bE7Po/default.jpg)
![How to PAINT Plastic For A Glossy Finish - More Autobody Q&A](https://i.ytimg.com/vi/23qBtWKqqGI/default.jpg)
![Flow Coating Process | How To Avoid Orange Peel on Single Stage And More Autobody Q&A](https://i.ytimg.com/vi/5IYx2f07ayU/default.jpg)
![Recommended Undercoating Seal For Cars | How To Fix Dents || Autobody Q&A](https://i.ytimg.com/vi/mtX5QKNFrY4/default.jpg)
![Best Primer To Use On Metal | Best Grit On Bare Metal and More Autobody Q&A](https://i.ytimg.com/vi/ScqlSsykqaQ/default.jpg)
![Autobody Paint Air Compressor Set Up | How To Remove Car Dings, and More Autobody Q&A](https://i.ytimg.com/vi/P1zMNKQs3NY/default.jpg)
![What Causes Paint Runs and How To Avoid | Fixing Paint Chips | Painting Tips in Cold Weather | Q&A](https://i.ytimg.com/vi/wd_i2vW1JOw/default.jpg)
![Autobody Paint Problems and Solutions | Filling Holes in Car | Sanding Single Stage and More Q&A](https://i.ytimg.com/vi/FnBXMkmhhIA/default.jpg)
![Clearcoat Over Single Stage | DIY Rust Repair | Painting Wheels - Q&A](https://i.ytimg.com/vi/YLJqNZnQLYo/default.jpg)
![Car Rust Repair, Strip Paint From Metal, Painting Rims, Water Solvent-based Cleaners - Autobody Q&A](https://i.ytimg.com/vi/x34syZ6KeMQ/default.jpg)
![Using Hardener and Reducer On Clearcoat, How To Mask Over Basecoat - Autobody Q&A](https://i.ytimg.com/vi/uujoTwUAYxI/default.jpg)
![Cutting and Buffing, Tacking, Epoxy vs 2k Primer, Two Stage Painting, and more Autobody Q&A](https://i.ytimg.com/vi/zi4cExAnut8/default.jpg)
![How To Spray Metallic Grey Paint, Types of Sandpaper Grit, Inflatable Booth | More Autobody Q&A](https://i.ytimg.com/vi/NUzbDmr8zcE/default.jpg)
![How To Paint Over Epoxy Primer, Color Sand & Buff over Base Clear, Single Stage Metallic || Q&A](https://i.ytimg.com/vi/6okZ3vzGlhY/default.jpg)
![What Causes Tiger Stripes On Paint | Painting Decals | Fixing Orange Peel | Dry Spots - and More Q&A](https://i.ytimg.com/vi/4AlWysz4JXw/default.jpg)
![Autobody Paint Job and Repair: How To Spray Pearl, Fan Setup, Aluminum Dent Repair, & More Autobody](https://i.ytimg.com/vi/QdPpIsKINVQ/default.jpg)
![SPRAY PAINTING Like a PRO! Even With a CRAP GUN! and More](https://i.ytimg.com/vi/hBf24mV2UjE/default.jpg)
![How To Auto bodywork and Paint Bare Metal | Single Stage Repair | Using Sealer Primer || More Q&A](https://i.ytimg.com/vi/5NNnYPugj2Y/default.jpg)
![Prep and Paint Raw Bumper, Spraying Clear Over Single Stage, Applying Bondo - More Autobody Q&A](https://i.ytimg.com/vi/-ylF9NDq3lI/default.jpg)