How to change the bulb in the headlight Toyota Estima 2008 RU lang ENG subtitles and description ds4
RU lang
ENG subtitles and description
2008
Hi! Try to change the bulb in the headlight through the plastic window in the plastic mud guard above the wheel.
I have an Estima 2008 and I did not succeed to replace bulb through this hole in this model.
Take the jack, stones under the wheels, lift the car, in the plastic mud protection above the wheel, find a small plastic window. Unscrew the 3 bolts and pull back the curtain and try to change through this hole in the plastic mud protection of the wheel. If it works out, then you're in luck. If not, then remove the bumper.
Sign all bolts and rivets!
You pick up the rivets with a screwdriver and then stick them out.
If the bolts are rusty, it is better to go through the WD-40 first. I broke on screw and it caused a problem.
To remove the headlight, you need to unscrew 3 bolts, then remove the metal bar on two bolts, then remove the headlight from the latch - the headlight is removed to itself at an angle of about 45 degrees.
Well, to change the light bulb itself is already a “Kindergarten with a drum”
I will be very glad if my video helped someone. It took me 7 hours to change the light bulb, as I did not find a video of how to remove the headlight and was afraid to break the headlight. I hope this video will speed up your process.
DS4
Привет! Пробуйте поменять лампочку в фаре через пластмассовое окно в пластмассовой грязевой защите над колесом.
У меня Эстима 2008г и в этой модели у меня не получилось.
Берете домкрат, под колеса камни, поднимаете машину, в пластмассовой защите над колесом, найдите небольшое пластмассовое окошко. Откручиваете 3 болта и отодвигаете шторку и пробуйте поменять через данное отверстие в пластмассовой грязевой защите колеса. Если получится, то Вам повезло. Если нет, то снимаете бампер.
Все болты и заклепки подписывайте!
Заклепки подцепляете отверткой затем высовываете.
Если болты ржавые, то лучше сначала пройти вэдэшкой.
Чтобы снять фару нужно открутить 3 болта, затем снять металлическую планку на двух болтах, затем снять фару с защелки - фара снимается к себе под углом примерно 45 градусов. Ну а саму лампочку поменять уже “Детский сад с барабаном”
буду очень рад если кому то помогло мое видео. У меня заняло часов 7 поменять лампочку, так как я не нашел видео как снять фару и боялся сломать фару. Надеюсь это видео ускорит ваш процесс.
Видео How to change the bulb in the headlight Toyota Estima 2008 RU lang ENG subtitles and description ds4 канала kasperskycom
ENG subtitles and description
2008
Hi! Try to change the bulb in the headlight through the plastic window in the plastic mud guard above the wheel.
I have an Estima 2008 and I did not succeed to replace bulb through this hole in this model.
Take the jack, stones under the wheels, lift the car, in the plastic mud protection above the wheel, find a small plastic window. Unscrew the 3 bolts and pull back the curtain and try to change through this hole in the plastic mud protection of the wheel. If it works out, then you're in luck. If not, then remove the bumper.
Sign all bolts and rivets!
You pick up the rivets with a screwdriver and then stick them out.
If the bolts are rusty, it is better to go through the WD-40 first. I broke on screw and it caused a problem.
To remove the headlight, you need to unscrew 3 bolts, then remove the metal bar on two bolts, then remove the headlight from the latch - the headlight is removed to itself at an angle of about 45 degrees.
Well, to change the light bulb itself is already a “Kindergarten with a drum”
I will be very glad if my video helped someone. It took me 7 hours to change the light bulb, as I did not find a video of how to remove the headlight and was afraid to break the headlight. I hope this video will speed up your process.
DS4
Привет! Пробуйте поменять лампочку в фаре через пластмассовое окно в пластмассовой грязевой защите над колесом.
У меня Эстима 2008г и в этой модели у меня не получилось.
Берете домкрат, под колеса камни, поднимаете машину, в пластмассовой защите над колесом, найдите небольшое пластмассовое окошко. Откручиваете 3 болта и отодвигаете шторку и пробуйте поменять через данное отверстие в пластмассовой грязевой защите колеса. Если получится, то Вам повезло. Если нет, то снимаете бампер.
Все болты и заклепки подписывайте!
Заклепки подцепляете отверткой затем высовываете.
Если болты ржавые, то лучше сначала пройти вэдэшкой.
Чтобы снять фару нужно открутить 3 болта, затем снять металлическую планку на двух болтах, затем снять фару с защелки - фара снимается к себе под углом примерно 45 градусов. Ну а саму лампочку поменять уже “Детский сад с барабаном”
буду очень рад если кому то помогло мое видео. У меня заняло часов 7 поменять лампочку, так как я не нашел видео как снять фару и боялся сломать фару. Надеюсь это видео ускорит ваш процесс.
Видео How to change the bulb in the headlight Toyota Estima 2008 RU lang ENG subtitles and description ds4 канала kasperskycom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Cakes in the bin. Торты в мусорник.Sage coffee machine fault sound and reason. In my case wasn't pump, but pipe. Descale regularily.Coffee machine pump replacement. RU lang, eng subtitles. Sage BES870 Замена насоса Сэйдж Pipe scaleЗамена защитного стекла Panzer на Remax. RU lang.Рыжий котенок 20140911 083106Metal figurines, Museum of metal figurines Aliens MoscowVoronezh, swimming pool,Kitchen tap review. Обзор кухонного крана. Broken after 1 week of use. Сломался за неделюCork bus to Dublin 2014 20140619 160007How to make Cake topper on Cricut Maker in Cricut design spaceHow to make Cake topper in Cricut Design Space Cricut Maker RU lang Как сделать топпер на тортIDTWFHBZ Швейцария GOPR0788GOPR0791Снеговик кот GOPR0792Royal wedding cake does not pass through the doorway in heightСвадьба. Свадебная церемонияHow to built gaming PCLego shop in ParisCasino Monte Carlo,Yuliya Stupak, Nataliya Nepryaeva, Tatyana Zorina, Veronika Stepanova, Olimpics 2022