Laminated Plywood Top Workbench Build Part 1

Part one of two. I build a workbench top from 2 cut-off pieces of 3/4" maple plywood. In this episode, I cut the pieces to size, glue them together, and trim the top with 2x lumber, milled to spec. Part two will wrap the project up.

Link to part two:
https://youtu.be/EBmzTOgosHE

I walk you through the process I took to get the top constructed and ready for a base and legs.

Shot with iPhone 6s and DragonTouch 4k
Edited with iMovie

Equipment
Dewalt table saw, random orbital sander, and driver
Kreg pocket hole kit, clamps, and screws
Titebond II wood glue
Makita circular saw

Видео Laminated Plywood Top Workbench Build Part 1 канала The Goode Life Outdoors