How to Install AMS Honeycomb Frame Guards for a Pro Finish and Durability

00:00 Preparation
00:13 Clean the frame with alcohol
00:27 Select the area to protect
00:37 Start applying
01:05 Enjoy your job, let it dry and go ride

Protecting your bike frame from scratches, chips, and cable wear has never been easier with the AMS Honeycomb Frame Guards. Our adhesive PVC material is not only highly durable, but also easy to install on your bike. In this video, we'll show you step-by-step instructions on how to install the AMS Honeycomb Frame Guards for a professional finish and long-lasting protection.

To get started, you'll need to identify the areas of your bike frame that you want to protect and make sure to install the frame guards in a warm area (temperatures above 12ºC/53F) for best results. We also recommend cleaning the area with alcohol or a similar solution to remove any dust, mud, or debris and to avoid using cleaners with silicones that can damage the adhesive.

Once you're ready to install, apply the Frame Guard gently and use your hands to help it adapt to the curves of your bike frame. You can also reposition it if needed while the glue is still fresh. After applying, make sure to apply even pressure around the entire surface for a better adhesion.

After the installation, let it bond for a few hours and you're ready to ride! If you ever need to remove the frame guard, we recommend using a hairdryer or heat gun to soften the adhesive and make the removal process easier.

For more information on the AMS Honeycomb Frame Guards and other bike protection products, check out our website and make sure to subscribe to our channel for more helpful tips and tutorials.

https://www.allmountainstyle.com/collections/bike-guards

#AMS #Honeycomb #FrameGuards, #bikeframe #protection #mtb

Видео How to Install AMS Honeycomb Frame Guards for a Pro Finish and Durability канала AMS AllMountainStyle