Hydraulic Shop Press 12Ton From Sanzi Imports Ltd JL-P02121

We are pleased to offer our latest version of the 12 Ton Shop Press.
Now if you are working on that Classic Car, slaving away in your Commercial garage, putting over-sized bearings and bushes into holes that seem too small… and you’ve tried hitting it with a hammer or a punch… or even tried to squeeze it with a Bench Vice…. Go On… make your life easy…
Get a Shop Press like this one.
Robustly constructed out of 5mm Steel this Shop Press stands a full 1.36m High.
The 12 Ton Bottle Jack with Handle is well set up to provide accurate pressure where and when you need it.
The Pressure Plate is adjustable up and down using two Zinc Coated adjustment pins.
The Bottle Jack plate is raised and lowered under spring tension to ensure easy release when needed.
The Full Specs on the machine are:
Height: 1.36m
Width: 0.51m
Maximum – Minimum height of Pressure Plate : 100mm – 750mm (Adjustable)
Two Steel Anvil Plates are provided : 160mm x 70mm x 15mm
All presented in Red and Black as pictured. You will go a long way to beat the convenience of owning one of these tools.
Good for Commercial and Home use.
Supplied as a self-assembly Item with Instructions and in two cartons.
This article is heavy. Please expect some Freight Charges.

Видео Hydraulic Shop Press 12Ton From Sanzi Imports Ltd JL-P02121 канала Chris Stiebel