How To Use a Bead Roller with Offset Tipping Dies - Sheet Metal Fab at Eastwood

It's easy to make your own floor pans, wheel tubs, drip rails, motorcycle fenders, firewalls, dash components and more. The Forming Dies really expand the abilities of a bead roller. See how easy it is to use in this video.

More Info Here: https://www.eastwood.com/eastwood-metal-bead-roller.html?utm_source=youtube&utm_medium=annotation&utm_campaign=2016-01-14&utm_content=Bead%20Roller
About Eastwood Bead Roller Kit - with Mandrels
Our metal bead roller tool with mandrels is perfect for beginning metal fabrication workers on a budget. Just mount this bead roller tool in your vise, attach the crank handle and you're all set to raise ridges and flanges in floor panels, firewalls, doors and more. The 17"-deep throat lets you work with work pieces up to 34" wide. Eastwood Bead Roller weights 59lbs. 29" in length, 11" in width, 5" in depth and constructed of solid 1/2"-thick steel plate. Comes with a 1-year manufacturer's warranty. Imported.

Contents
Bead roller tool includes: 1/16", 1/8", 1/4" flanging mandrels; 1/4", 3/8", 1/2" bead mandrels; 1/2" backing plate with 17"-deep throat; hand crank; and shaft bushings that can be lubricated.

Increase the capabilities of your bead roller with more forming dies.

Fits most bead rollers with 7/8 in or 22mm shafts
Includes 9 steel dies and 1 polyurethane lower wheel
Hem edges, create offsets and flanges, form style lines, contours and channels
Dies are machined out of CR12 steel with a 35 HRC hardness
This kit includes an additional 10 dies to use with any bead roller with a 7/8 inch (22mm) shaft. With these additional dies on your bead roller you can create hemmed edges, offset flanges, contours, deep channels, and style lines. This kit also includes a polyurethane lower “skate board” wheel, which can be used with a variety of upper dies. The dies includes in this kit are inside and outside offset dies, 3/8 and 1/2 inch tipping dies, round and knife edge tipping dies, 180 degree lower die, lower edge forming die and a lower forming die. All are made of CR12 steel with a Rockwell hardness of 35 HRC.

Kit includes the following:
180 degree lower die
Inside offset die
Outside offset die
Knife edge tipping die
Lower edge forming die
3/8 in tipping die
1/2 in tipping die
Round tipping die
Lower forming die

if you're restoring a car, Eastwood has all the tools and supplies you need to do the job right.

Видео How To Use a Bead Roller with Offset Tipping Dies - Sheet Metal Fab at Eastwood канала Eastwood Company