ONEX 2020 FOR SALE (4K) ****SOLD****

**** SOLD****
Builder background:

B.S.M.E.
M.S. Management
Over forty years of commercial machine design, build and test ranging from small horizontal earth boring machines, large harvesting combines to high speed automated packaging line labeling equipment.

First project is Sonex S/N 0705 completed with Special Airworthiness Certificate issued on October 14, 2007 by an FAA designated examiner. I am currently flying this aircraft and have accrued approximately 280 hours.

The Onex project S/N 055 was started on December 3, 2011 and completed on January 22, 2020.
The aircraft is complete and taxi tests are being conducted. It is ready for a Designated Airworthiness Inspection.
Both aircraft kits were purchased directly from Sonex Inc., fabricated and assembled in my home garage in Palm Desert, California, and all final assembly and subsequent storage has been in a hangar at the Jacqueline Cochran Airport in Thermal, California.

I have the original sets of plans and manuals for both airframe and engine and a complete detailed build logs with pictures, and purchased parts receipts.
ONEX GENERAL DESCRIPTION
Serial Number: ONX0055

This aircraft conforms to the amateur built light sport category.

Both airframe and engine were purchased as kits from Sonex Aircraft Inc., in Oshkosh, Wisconsin.

It is an all metal, single place, fixed conventional gear, low folding wing, 80 horsepower engine with wood propeller, fiberglass cowling, wing and tail tips.

Sonex performance figures suggest:

Gross Weight 1100 lbs.
Empty Weight 600 lbs. [272.2 kg]
Range (1) 535 miles
Cruise Speed @ Sea Level* 135 mph
Cruise Speed @ 8000 ft. (TAS) 155 mph
Power Loading (GW/HP) 11.875
T.O. Distance 400 ft.
Landing Distance 500 ft.
Service Ceiling (calculated) 16,000 ft.

Aerobatic Category:

Gross Weight - Aerobatic 950 lbs. [430.9 kg]
Baggage (Max) 20 lbs.
Useful Load 350 lbs.
Rate of Climb 700-900 fpm
Positive Load Factor +6.0 Gs
Negative Load Factor -3.0 Gs
L/D 10:1
CG Limits 20-32% Wing ChordONEX AIRCRAFT DETAILS
Airframe:
Tail wheel configuration with 8 ply tires and solid rubber tailwheel
Tailwheel steering link with rod-end bearings
Sonex machined brake drums
Parking brake
Polished exterior with graphics
Painted fiberglass components
Bolted instrument panel
MGL Stratomaster Ultra display with RDAC converter
Automotive oil pressure gauge
Keyed ignition start switch
Toggle switches for mags, display, 12 volt socket and extras
System circuit breakers
Marine magnetic compass
Skid/Slip instrument
Vertex Pilot III handheld transceiver
12 volt noise filtered adapter, headphone adapter & PTT switch
David Clark headset
Red Tail air band bent antenna with connector cable
Aircraft Spruce #15144 Pitot - static tube
Lever control for exterior mounted elevator trim tab
Wheel pants
Usher flush fuel cap
Custom seat cushions
Five point seat belt harness
Snapvent air vents
Aircraft, engine and propeller log books
Odyssey PC625 battery

Engine:
AeroVee 2180 2.1 engine with factory assembled crankshaft
AeroVee dual ignition
Engine mounted oil cooler
K & N lifetime air filter
Automotive oil filter and fuel filter
Sonex air/oil separator with return to crankcase
Sonex AeroConversions Aeroinjector carburetor
Sonex cooling baffles with silicone seals
Sonex fuel level probe
Aero Conversions CHT probes
VDO oil pressure sender

Propeller:
Sterba wood prop.
Sonex hub/crush plate

Видео ONEX 2020 FOR SALE (4K) ****SOLD**** канала Steven Young