How to make copper electroforming solution DIY

Hello, Here's the best way I have found to make copper electroforming solution. Hopefully my past attempts, and failures will lead to your success.

If you'd like to, Please check out my Etsy shop.
https://www.etsy.com/shop/AFewRandomThings

SUPPLIES LIST:
--- One large pot to boil water. This must fit at least one gallon. You will not put any chemicals in this pot so regular kitchen pot is fine.

(I pour the solution back into the gallon water jug when it's finished so a plastic funnel is also a good idea. I got a few from the dollar store. Don't ever use either of these items for food in the future.)

--- Plastic or glass stirring rod or spoon. No wood or metal. It will ruin the utensil and contaminate the solution.

--- Plastic or glass Measuring cup. Not metal. You can usually find these at the dollar store as well.

--- Small medicine cup that can measure MLs (Milliliters). Amazon has them very cheap or take one off a bottle of medicine you don't need it for. Don't use it for anything except making solution again.

INGREDIENTS LIST: (4 ingredients)
If you want to skip purchasing all of these separately check out Caswell plating copper electroplating kits. Not sponsored. Not that they know I exist. :P
***https://www.caswellplating.com/electroplating-anodizing/copper-plating-kits.html

---One gallon (128 oz) of DISTILLED water (Found at any grocery store)

--- One 2lb (32 oz) tub of Zeps root kill or 2lbs of Copper Sulfate Crystals

***Single 2lb - https://www.homedepot.com/p/ZEP-2-lbs-Root-Kill-ZROOT24/100074551

***4 pack- https://www.homedepot.com/p/ZEP-32-oz-Root-Kill-Case-of-4-ZROOT24/202552809

***NOTE (This may not be available to ship from your local store, if so change the location of the preferred store.

--- 2/3 cup (160ml) of Battery/Sulfuric acid. I get this as a battery refill at my local auto parts store. Also, Amazon carries it. Search "Sulfuric acid"

--- 10 Ml of copper brightener. I love the one from Caswell plating. It's far cheaper then Rio Grand, and works just as well.
***https://www.caswellplating.com/copper-brightener-part-b-4oz.html

And, That's it. :)
I hope this helps everyone trying to make their own solution. I know I had a hard time figuring out the right recipe.

THANK YOU FOR WATCHING!!!!!!!!!

Видео How to make copper electroforming solution DIY канала A Few Random Things