Arduino IOT Project: Monitor Multiple analog sensors using Nodemcu ESP8266 and blynk
Download circuit diagram and Programming:
http://www.electroniclinic.com/monitor-multiple-analog-sensors-using-nodemcu-esp8266/
Download Libraries:
https://www.electroniclinic.com/arduino-libraries-download-and-projects-they-are-used-in-project-codes/
nodemcu board and library setup:
https://youtu.be/McTKlKnR07Q
Nodemcu power supply making:
https://youtu.be/FWYXp--6OAI
learn how to make a schematic and PCB:
https://youtu.be/pzFj3mx1v78
Relay driver circuit design calculation:
https://youtu.be/kXaVMAvHRtE
Project Description:
*****************************
My previous tutorial was based on how to monitor an analog sensor using only Nodemcu esp8266 and Blynk application. The disadvantage of using the only Nodemcu is that you can monitor only one analog sensor, as in Nodemcu we have only one analog pin A0. There are situations when we need to monitor multiple analog sensors. But the question is how we can monitor multiple analog sensors as Nodemcu has only one analog pin A0. Well, my friends at this point we have two options.
1. We can use a multiplexer with Nodemcu esp8266 wifi module and connect multiple analog sensors.
2. We can use Arduino Uno or mega with Nodemcu esp8266 wifi module and connect multiple sensors.
******************
Purchase links for Components with best prices.
Arduino Uno
https://amzn.to/3da4HDa
Arduino Nano
https://amzn.to/3stJMBe
Potentiometer:
https://amzn.to/2PehJHH
Nodemcu ESP8266 WiFi Module:
https://amzn.to/3sx24l4
LM7805 Voltage Regulator:
https://amzn.to/3tZx0uH
470uf capacitor:
https://amzn.to/3m5Nj6r
330-ohm resistor:
https://amzn.to/3w8PA5i
DC Female Power Jack:
https://amzn.to/31qcZ4b
Female Headers:
https://amzn.to/2QFLQYN
Male Headers:
https://amzn.to/3lZvt5d
LEDs:
https://amzn.to/3dsRt4D
Other Must-Have Tools and Components:
Arduino Uno, Nano, Mega, Micro "All types of Arduino Boards":
https://amzn.to/3fk5OTi
Top Arduino Sensors:
https://amzn.to/3vZbnfM
Super Starter kit for Beginners
https://amzn.to/3cq56C5
Top Oscilloscopes
https://amzn.to/3ctF3d8
Variable Supply:
https://amzn.to/2PEAqE7
Digital Multimeter:
https://amzn.to/2QGRPg1
Top Soldering iron kits: "best"
https://amzn.to/39nqDtb
Top Portable drill machines:
https://amzn.to/3suQMh7
Jumper Wires:
https://amzn.to/2NYPEDA
3D printers:
https://amzn.to/3ruG1dt
CNC Machines:
https://amzn.to/3cuZWVv
Electronics Accessories:
https://amzn.to/3sueV7z
Hardware Tools:
https://amzn.to/3m9UhaN
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
For more Projects and Tutorials visit our Website:
www.electroniclinic.com
Follow me on Facebook:
https://web.facebook.com/groups/190031841821771/
email: engrfahad@electroniclinic.com
About the Electronic Clinic:
Electronic Clinic is the only channel on YouTube that covers all the engineering fields. Electronic Clinic helps the students and other professionals to learn electronics designing and programming. Electronic Clinic has tutorials on
Arduino
Arduino projects
arduino programming
electronics
electronics tutorials
internet of things iot
wifi
arduino tutorial for beginners
arduino Uno
arduino Uno projects
Project Related Tags:
Arduino Tutorial
monitor multiple analog sensors using nodemcu esp8266
arduino blynk application
nodemcu esp8266 and blynk application
nodemcu esp8266 and blynk application based on multiple analog sensors monitoring
how to monitor multiple analog sensors
how to connect multiple analog sensors with nodemcu
how to connect multiple analog sensors with esp8266
arduino iot project
arduino nodemcu iot project
iot nodemcu project
iot Arduino nodemcu project
arduino iot projects using nodemcu
arduino iot project using esp8266
Nodemcu esp8266 wifi module connections with Arduino
remote monitoring with nodemcu esp8266
nodemcu esp8266 basics
arduino analog sensors monitoring using nodemcu esp8266
arduino wifi
blynk application
nodemcu esp8266
esp8266 module
esp8266 programming
Видео Arduino IOT Project: Monitor Multiple analog sensors using Nodemcu ESP8266 and blynk канала Electronic Clinic
http://www.electroniclinic.com/monitor-multiple-analog-sensors-using-nodemcu-esp8266/
Download Libraries:
https://www.electroniclinic.com/arduino-libraries-download-and-projects-they-are-used-in-project-codes/
nodemcu board and library setup:
https://youtu.be/McTKlKnR07Q
Nodemcu power supply making:
https://youtu.be/FWYXp--6OAI
learn how to make a schematic and PCB:
https://youtu.be/pzFj3mx1v78
Relay driver circuit design calculation:
https://youtu.be/kXaVMAvHRtE
Project Description:
*****************************
My previous tutorial was based on how to monitor an analog sensor using only Nodemcu esp8266 and Blynk application. The disadvantage of using the only Nodemcu is that you can monitor only one analog sensor, as in Nodemcu we have only one analog pin A0. There are situations when we need to monitor multiple analog sensors. But the question is how we can monitor multiple analog sensors as Nodemcu has only one analog pin A0. Well, my friends at this point we have two options.
1. We can use a multiplexer with Nodemcu esp8266 wifi module and connect multiple analog sensors.
2. We can use Arduino Uno or mega with Nodemcu esp8266 wifi module and connect multiple sensors.
******************
Purchase links for Components with best prices.
Arduino Uno
https://amzn.to/3da4HDa
Arduino Nano
https://amzn.to/3stJMBe
Potentiometer:
https://amzn.to/2PehJHH
Nodemcu ESP8266 WiFi Module:
https://amzn.to/3sx24l4
LM7805 Voltage Regulator:
https://amzn.to/3tZx0uH
470uf capacitor:
https://amzn.to/3m5Nj6r
330-ohm resistor:
https://amzn.to/3w8PA5i
DC Female Power Jack:
https://amzn.to/31qcZ4b
Female Headers:
https://amzn.to/2QFLQYN
Male Headers:
https://amzn.to/3lZvt5d
LEDs:
https://amzn.to/3dsRt4D
Other Must-Have Tools and Components:
Arduino Uno, Nano, Mega, Micro "All types of Arduino Boards":
https://amzn.to/3fk5OTi
Top Arduino Sensors:
https://amzn.to/3vZbnfM
Super Starter kit for Beginners
https://amzn.to/3cq56C5
Top Oscilloscopes
https://amzn.to/3ctF3d8
Variable Supply:
https://amzn.to/2PEAqE7
Digital Multimeter:
https://amzn.to/2QGRPg1
Top Soldering iron kits: "best"
https://amzn.to/39nqDtb
Top Portable drill machines:
https://amzn.to/3suQMh7
Jumper Wires:
https://amzn.to/2NYPEDA
3D printers:
https://amzn.to/3ruG1dt
CNC Machines:
https://amzn.to/3cuZWVv
Electronics Accessories:
https://amzn.to/3sueV7z
Hardware Tools:
https://amzn.to/3m9UhaN
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
For more Projects and Tutorials visit our Website:
www.electroniclinic.com
Follow me on Facebook:
https://web.facebook.com/groups/190031841821771/
email: engrfahad@electroniclinic.com
About the Electronic Clinic:
Electronic Clinic is the only channel on YouTube that covers all the engineering fields. Electronic Clinic helps the students and other professionals to learn electronics designing and programming. Electronic Clinic has tutorials on
Arduino
Arduino projects
arduino programming
electronics
electronics tutorials
internet of things iot
wifi
arduino tutorial for beginners
arduino Uno
arduino Uno projects
Project Related Tags:
Arduino Tutorial
monitor multiple analog sensors using nodemcu esp8266
arduino blynk application
nodemcu esp8266 and blynk application
nodemcu esp8266 and blynk application based on multiple analog sensors monitoring
how to monitor multiple analog sensors
how to connect multiple analog sensors with nodemcu
how to connect multiple analog sensors with esp8266
arduino iot project
arduino nodemcu iot project
iot nodemcu project
iot Arduino nodemcu project
arduino iot projects using nodemcu
arduino iot project using esp8266
Nodemcu esp8266 wifi module connections with Arduino
remote monitoring with nodemcu esp8266
nodemcu esp8266 basics
arduino analog sensors monitoring using nodemcu esp8266
arduino wifi
blynk application
nodemcu esp8266
esp8266 module
esp8266 programming
Видео Arduino IOT Project: Monitor Multiple analog sensors using Nodemcu ESP8266 and blynk канала Electronic Clinic
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Blynk Home Automation with Multiple ESP8266 BoardsThingSpeak IOT Cloud with NodeMCU ESP8266- Temperature Monitoring Dashboard[Fully Explained]--Multiple Data--Serial Communication between Arduino and NodeMCU (ESP8266)IoT Water Level Sensor Using ESP8266 Nodemcu, TOF10120, and Blynk, Water Level MonitoringMultiple Sensors, Multiple Appliances using NodeMCU & Blynk | IOT Projects | ESP8266 ProjectsAdd or increase Analog Pins for NodeMCU or Arduino using 16 channel analog multiplexer moduleHome Automation System using multiple NodeMCU ESP8266 network with Blynk | IoT Projects 2021Arduino Tutorial: Control LED light with 7Inch HMI LCD Touch ScreenChange ESP32 Wi-Fi credentials from Mobile App.[English]Monitoring upto 16 analog Sensors using NodeMCU (ESP8266 12e) | ESP8266 Projects(LEGACY) Tutorial: Control multiple devices with Blynk app (Arduino Mega and nodeMCU)How to make SoftwareSerial Communication between Arduino Uno and NodeMCUIOT based Water Quality monitoring using Arduino, pH Sensor, Nodemcu ESP8266 & BlynkIoT Based Agriculture Monitoring System Using Arduino & Node MCU.ESP8266 + Arduino + database - Control Anything from AnywhereIoT Energy Meter using NodeMCU & CT Current sensor | JLCPCB | Ubidots | DFRobotRead Multiple Analog values in esp8266 | DIY | NodemcuHow to make Automatic Irrigation System Using IoT? I Full Process | Step by StepSerial Communication between Arduino and Nodemcu||Reading sensor data from Arduino to Nodemcu.