DIY IV-16 Numitron Clock Part 1 - Driving the Tubes!
To start off, thanks to the video sponsor: JLCPCB for sponsoring this project. JLCPCB Prototype for $2 (Any Color): https://jlcpcb.com
My IV-16 Numitron Tubes took a little while to arrive from Europe but now that they are here I've designed a little board to hold them along with the circuity necessary to drive them. All tubes are driven unmultiplexed with each having their own 74HC595 serial shift register so all six tubes can be controlled with only 4 pins (one of them being a pwm brightness control). In this video we take a look at the display boards I just received fresh from JLCPCB, assembly them, program some test code to drive the tubes with a simple counter demo, and look at the final display board running. In the next video we will design, assemble, program and test the additional vertical colon boards as well as the main bluetooth clock board. Stay tuned to see the final clock!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've posted a link for Ebay purchase referrals. If you use the link below then I get a small kickback from your purchase (it will cost you nothing, I just get paid for referring customers).
https://ebay.to/2G1OY6v
Special thanks to Eric Skiff for freely providing the music used in this video off his album Resistor Anthems. His music can be found at http://ericskiff.com/music/
Visit my site: www.diytronics.blogspot.com
My RGB Gameboy Backlight Controller is now available at www.roarkesretrocorner.com!!!
Use the code SJM (all caps) to receive 10% off of your order!
ICStation Affiliate Link: http://www.icstation.com/index.php?aid=212
Code: sjmics
Discount Amount: 15% off
Max Use: 1 (one for per user)
Amount Limit: 300
Consider supporting me on Patreon: www.patreon.com/sjm4306
Видео DIY IV-16 Numitron Clock Part 1 - Driving the Tubes! канала sjm4306
My IV-16 Numitron Tubes took a little while to arrive from Europe but now that they are here I've designed a little board to hold them along with the circuity necessary to drive them. All tubes are driven unmultiplexed with each having their own 74HC595 serial shift register so all six tubes can be controlled with only 4 pins (one of them being a pwm brightness control). In this video we take a look at the display boards I just received fresh from JLCPCB, assembly them, program some test code to drive the tubes with a simple counter demo, and look at the final display board running. In the next video we will design, assemble, program and test the additional vertical colon boards as well as the main bluetooth clock board. Stay tuned to see the final clock!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've posted a link for Ebay purchase referrals. If you use the link below then I get a small kickback from your purchase (it will cost you nothing, I just get paid for referring customers).
https://ebay.to/2G1OY6v
Special thanks to Eric Skiff for freely providing the music used in this video off his album Resistor Anthems. His music can be found at http://ericskiff.com/music/
Visit my site: www.diytronics.blogspot.com
My RGB Gameboy Backlight Controller is now available at www.roarkesretrocorner.com!!!
Use the code SJM (all caps) to receive 10% off of your order!
ICStation Affiliate Link: http://www.icstation.com/index.php?aid=212
Code: sjmics
Discount Amount: 15% off
Max Use: 1 (one for per user)
Amount Limit: 300
Consider supporting me on Patreon: www.patreon.com/sjm4306
Видео DIY IV-16 Numitron Clock Part 1 - Driving the Tubes! канала sjm4306
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
"Numiqueen" Numitron Clock Build4-Digit DA2000 Numitron Clock - Part 4 DriversGBA SP IPS LCD InstallationArduino NANO Propeller LED Analog ClockDIY - Nixie tube boost power supplyFran's Retro Bench: BCD Clock Counter With NumitronNumitron tube Arduino testElectric Science Free Energy Using Magnet With Light Bulb At Home 2019.Gameboy Pocket Backlight Ribbon (De)SolderingVintage Display Technology Pt.11: Numitron & Minitron DisplaysFranLab: BCD Modular Counter Project - With Numitron!Sony NW-S202F Battery ReplacementDIY IV-21 Tiny VFD ClockNumitron ClockSony MZ-R900 Minidisc Broken Rear Switch RepairNumitron Tube ExampleLixie Party! (On a messy desk)Making a Circuit Board From ScratchDIY Assemble A Time Machine - EleksTube Bamboo 6-Bit Kit LED Luminous Clock - Banggood.com