Model Railway Points/Turnout Servo Motor Installation
This video shows how I go about installing R/C style servos as model railway points motors using inexpensive and readily available parts.
The simplest method I find is to use a piece of aluminium channel (15x15x15mm) as this provides a good tight fit for servos. If your servo is loose, then squeeze the channel (with the servo removed) for a good tight fit.
The aluminium channel should be cut to 5 cm and have a 2mm hole drilled in each end to mount on the baseboard. On one end drill a 1mm hole about 6 mm from one of the 2mm holes to provide a fulcrum.
Using a 5cm length of 1mm piano wire, I create a ‘Z’ in one end and feed into the servo horn.
The baseboard is drilled to 5mm and the fulcrum hole on the aluminium channel positioned over its centre.
More at: www.loolee.org
Видео Model Railway Points/Turnout Servo Motor Installation канала Megapoints Controllers
The simplest method I find is to use a piece of aluminium channel (15x15x15mm) as this provides a good tight fit for servos. If your servo is loose, then squeeze the channel (with the servo removed) for a good tight fit.
The aluminium channel should be cut to 5 cm and have a 2mm hole drilled in each end to mount on the baseboard. On one end drill a 1mm hole about 6 mm from one of the 2mm holes to provide a fulcrum.
Using a 5cm length of 1mm piano wire, I create a ‘Z’ in one end and feed into the servo horn.
The baseboard is drilled to 5mm and the fulcrum hole on the aluminium channel positioned over its centre.
More at: www.loolee.org
Видео Model Railway Points/Turnout Servo Motor Installation канала Megapoints Controllers
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MegaPoints Controllers DCC module software v 1.3 new setup featuresClive's F117 Maiden FlightSwitch box for servo controllers. Just plug in.We want You - Runcorn Model Flying ClubPete's BoomerangEngineering preview – Kato Unitrack and Tortoise stall motor driverR/C Arduino based high powered aircraft lighting controllerMegaPoints Controllers routing engine previewManufacturing MultiPanel LED/Switch test boardsPete Waterman's Railnuts team at Chester Cathedral – 20th Aug 2024Tonys Seagul SparrowhawkMultiPanel V 2 Mimic Crossover WiringIntelligent Networked Solenoid Points Motor DriverUAVP Quadrocopter landings made perfectSystem2 Starter Kit Servo Edition Quick Start GuideModel RailwayPoints Controller - Control board prototypeParkzone T28 Ultra Micro TrojanParkZone Habu doing loads of low passesLiverpool Scale Flying open day 2013S2 Servo8 Patch 4Clive's foamy Pilatus maiden flight