Lapping and Checking Valves (EASY WAY)
Just lapping some valves
Update: Since of this video's release to 12/25/17, the engine has no major problem. The engine is used to drive around 30 miles a day, and yes, I know that too much Prussian blue was used.
Tools Used:
Drill/Driver
hex to 1/4 drive
Lisle 21200 Valve Lapper
CTA Fine/Coarse Lapping Compound
Permatex Prussian Blue
Dykem Steel Blue Layout Fluid
Digital Caliper
Note: A proper valve job is recommended to be done by a professional in a machine shop. I did this because this engine is not worth much and it is not a high performance engine. (LOW BUDGET)
Видео Lapping and Checking Valves (EASY WAY) канала NA Nubilous
Update: Since of this video's release to 12/25/17, the engine has no major problem. The engine is used to drive around 30 miles a day, and yes, I know that too much Prussian blue was used.
Tools Used:
Drill/Driver
hex to 1/4 drive
Lisle 21200 Valve Lapper
CTA Fine/Coarse Lapping Compound
Permatex Prussian Blue
Dykem Steel Blue Layout Fluid
Digital Caliper
Note: A proper valve job is recommended to be done by a professional in a machine shop. I did this because this engine is not worth much and it is not a high performance engine. (LOW BUDGET)
Видео Lapping and Checking Valves (EASY WAY) канала NA Nubilous
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
$200 454 Engine Rebuild: Lapping Damaged Valves, Cylinder Head Cleaning and Reassembly (Ep.20)Porting cylinder heads to optimize engine performance | Hagerty DIYHow to do a True 3 Angle Valve Job SUPER CHEAP Using Neway Tools (as good as any pro machine shop!)How to Lap Valves or Re-seat ValvesMaking and replacement of valve seat. The cylinder head from Honda 450cc - Foreman 450 - TRX 450 SDIY Backyard Valve Joblapping valves and TESTING with water to VERIFY proper seal 1.8t audiDIY Valve cleaning, quick, easy, and SAFELYIt eats away Carbon Buildup EASIIILY!!Removing Carbon From Piston, Cylinder Walls, and Block DeckSTEVE TECH EPISODE 5 valve jobHow to Lap Valves Part 2: Engine Rebuild Part 7Cylinder Head 204 - Porting & PolishingHow-To: Lap Valves (by hand and drill method explained)How to Lap/Grind and Polish Valves (THE EASY WAY)Cylinder Head 105 - Valve Job BasicsHow to Check Valve Seats with a Vacuum GaugeHonda CRV 2 litre K20 Head Gasket Repair Part 6.... Lapping Valves & replacing Valve Stem Oil SealsHow to Clean and Refinish ValvesHow To: Low Buck Cylinder Head Rebuild