Copper Wire Wrapped Bracelet Cuff Tutorial

For this project you will need:

(5) pieces 9” (23cm) 20 gauge (0.8mm) round dead soft wire
(1) piece 9” (22.8cm) 20 gauge (0.8cm) round dead soft wire (hook, eye, bindings)
170” (432cm) 28 gauge (0.32cm) round dead soft wire

Tools used:
Flush cutters
Chain nose pliers (or flat-nose pliers)
Round nose pliers

Optional:
Tweezer nose pliers
Nylon jaw pliers

Find all of my items at https://www.SharonBurnettArtisan.com and follow me on Facebook: https://www.facebook.com/SharonBurnettArtisan/

Sign up for my newsletter http://bit.ly/2UcXV7D

Help keep this and future tutorials available by donating https://www.PayPal.Me/SharonBurnettArtisan

My Affiliate links below can result in a small commission. Some of the tools and supplies that I use in this video do receive a small commission if you purchase anything using one of these links. There is no cost to you for this, but it does help my channel and enables me to keep bringing you my video tutorials for free. Thank you!

eBay affiliate links:

Xuron Tweezer Nose Pliers http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575592168&toolid=10001&campid=5338691882&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dxuron%2Btweezer%2Bnose%2B450%2Bsmooth%26_sacat%3D0%26LH_TitleDesc%3D0%26_osacat%3D0%26_odkw%3Dxuron%2Btweezer%2Bnose%2B450
Copper wire in smaller quantities can be purchased from Modern Findings https://rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FCopper-Wire-Dead-Soft-Half-Hard-12-TO-30-Ga-1-2-Lb-Spool-Or-Coil%2F282378317000%3Fhash%3Ditem41bf0f2cc8%3Ag%3A-owAAOSwAPVZJ9QE&campid=5338691883&toolid=10001&customid=

#sharonburnettartisan #wirewraptutorials #wirewrappedcufftutorial

You are free to make and sell this cuff. However, I request that you note in the description that it was made following this tutorial.

Thank you!

Видео Copper Wire Wrapped Bracelet Cuff Tutorial канала Sharon Burnett, Artisan