AUTOOL SDT106 Use Demo Video Car Oil Pipe EVAP Smoke Leak Locator Diagnostic

AUTOOL SDT106 Car Smoke Machines Oil Pipe EVAP Leak Locator Autos Pipe Systems Smoke Leakage Detector Diagnostic Tool SDT-106
Feature:
SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.
SDT-106 Oil Pipe Leakage Detector fit for all pipe systems, including EVAP.
How to use:
1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle.
Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
7.After leak detection, please connect well the wires and pipe.
8.Notes:
* Please do leak detection away from smoke-sensitive parts.
* Do not run the detector over 8 minutes. It needs interval rest.
* The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.
* The round parts of this detector is with temperature, be careful to avoid scalding injury.

Видео AUTOOL SDT106 Use Demo Video Car Oil Pipe EVAP Smoke Leak Locator Diagnostic канала Jenna Lf