2014-2019 Kia Soul | Oil Catch Can Install

This is an overview and "how to" video for an oil catch can install on my 2014 Kia Soul Exclaim.
It is applicable for all 2nd gen Souls (2014-2019) equipped with a 2.0L engine.

This is my first how-to video, so please bear with my stumbling speech throughout (i.e. using the term "bolt" when "screw" should've been used and any other misspoken and repetitive words).

PARTS LIST

►Oil Catch Can: https://www.amazon.com/gp/product/B07H8BSTHB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

NOTES: The oil catch can also comes with teflon tape that you'll want to apply to both fittings to avoid potential leaks. Apply 3 to 4 revolutions in the opposite direction of how you'll thread the fittings into the catch can.

►Armor Mark 3/8” Fuel Line Hose (purchase 20” and trim as needed): https://www.autozone.com/plumbing-hosing/rubber-hose/armor-mark-fuel-line-hose/4956_0_0

►Armor Mark 15/32” PCV Hose (purchase 36” and trim as needed): https://www.autozone.com/plumbing-hosing/rubber-hose/armor-mark-pcv-and-emission-hose/13693_0_0

►5/16” to 7/8” Hose Clamps | 4 pack: https://shop.advanceautoparts.com/p/ideal-standard-type-f-hose-clamp-size-06-5203058/11865265-P
OR https://www.autozone.com/gaskets-and-miscellaneous-fasteners/hose-clamp/koehler-5-16in-to-7-8in-hose-clamp-4-pack/268458_0_0

►M6-1.00 x 16 Screw (optional as you can use the self-tapping screws provided in the oil catch can kit, but that would involve a little more work). This was purchased from Lowe's hardware aisle---in the metric screws bin, but other M6-1.00 screws will thread into the hole in the radiator beam. I wouldn't go too long or short.

TOOLS LIST

►Needle nose pliers and/or regular pliers: to move OEM pinch clamps
►Allen wrenches: 8mm and 2.5mm
*4mm if you use the M6-1.00 x 16 allen screw shown in video. I used/said 5/32 in the video, but that was not an exact fit although it did the job. 4mm is the proper size.
►5/32 chainsaw file: to enlarge the oil catch can bracket hole for the M6-1.00 x 16 screw
►Flathead screwdriver: to help with removing stock hose off the PCV and intake manifold
►17mm deep socket: to tighten fittings into the oil catch can
►10mm socket: to loosen 2 intake hose screws
►1/4 socket or Phillips screwdriver: to loosen/tighten hose clamps
►WD-40 or oil: to lubricate the insides of the hoses to fit onto the fittings and intake manifold
►Sharp scissors or blade: to trim hoses to size

#KiaSoul #OilCatchCan

Видео 2014-2019 Kia Soul | Oil Catch Can Install канала HK