Install HP DesignJet Z6 & Z9+ printer series | HP DesignJet | HP
Learn how to install the HP DesignJet Z6 & Z9+ printer series.
Chapters:
00:00 Introduction
00:23 Recommendations before starting
00:51 Open up the box and locate stand pieces
01:00 Pieces required to assemble printer
01:59 Assemble printer legs
02:29 Attach printer legs to cross brace and printer body
06:50 Assemble fabric basket
07:12 Set up the printer
08:30 Connect network cable
08:34 Prepare power cable, plug into the printer, and power on the printer
08:49 Select language
08:56 Install firmware and gloss enhancer kit
09:30 Printhead and ink cartridge set up
12:45 Load roll of paper onto spindle and adjust stopper
14:04 Print alignment pages for models with vertical trimmer
14:15 Connect printer to the internet
14:40 Prepare for software setup
More support options for your HP device are available at http://hp.com/support.
Follow these steps to set up the HP DesignJet Z6 & Z9+ printer series:
- Remove the orange tape pieces from the product,
- Open the vertical trimmer´s cover and confirm that the modules are located on the bar.
- Open the top window cover.
- Remove the tape.
- Turn the cardboard support 90 degrees to the right.
- Carefully lift the cardboard support up and out of the product and discard it.
- Inside the right-hand side of the printer, remove the stopper and discard it.
- Remove the orange tape and unlock the wheels.
- Move the printer to its destination.
- Connect the network cable.
- Connect the power cable to the printer, and the outlet.
- Switch the printer on.
- On the front panel, the HP logo appears.
- You will be prompted to select the language of the product.
- If you find a USB flash drive in a plastic bag inside of the box, it contains the latest firmware.
- Please follow the instructions in the bag, otherwise please ignore this step.
- At this point, the Front Panel will ask you to install the gloss enhancer kit.
- If you don’t have it, ignore this step.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
#HP #HPSupport #HPDesignJet
SUBSCRIBE: www.youtube.com/HPSupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere – every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp
This video was produced by HP.
How to Install HP DesignJet Z6 & Z9+ printer series | HP DesignJet | HP
Видео Install HP DesignJet Z6 & Z9+ printer series | HP DesignJet | HP канала HP Support
Chapters:
00:00 Introduction
00:23 Recommendations before starting
00:51 Open up the box and locate stand pieces
01:00 Pieces required to assemble printer
01:59 Assemble printer legs
02:29 Attach printer legs to cross brace and printer body
06:50 Assemble fabric basket
07:12 Set up the printer
08:30 Connect network cable
08:34 Prepare power cable, plug into the printer, and power on the printer
08:49 Select language
08:56 Install firmware and gloss enhancer kit
09:30 Printhead and ink cartridge set up
12:45 Load roll of paper onto spindle and adjust stopper
14:04 Print alignment pages for models with vertical trimmer
14:15 Connect printer to the internet
14:40 Prepare for software setup
More support options for your HP device are available at http://hp.com/support.
Follow these steps to set up the HP DesignJet Z6 & Z9+ printer series:
- Remove the orange tape pieces from the product,
- Open the vertical trimmer´s cover and confirm that the modules are located on the bar.
- Open the top window cover.
- Remove the tape.
- Turn the cardboard support 90 degrees to the right.
- Carefully lift the cardboard support up and out of the product and discard it.
- Inside the right-hand side of the printer, remove the stopper and discard it.
- Remove the orange tape and unlock the wheels.
- Move the printer to its destination.
- Connect the network cable.
- Connect the power cable to the printer, and the outlet.
- Switch the printer on.
- On the front panel, the HP logo appears.
- You will be prompted to select the language of the product.
- If you find a USB flash drive in a plastic bag inside of the box, it contains the latest firmware.
- Please follow the instructions in the bag, otherwise please ignore this step.
- At this point, the Front Panel will ask you to install the gloss enhancer kit.
- If you don’t have it, ignore this step.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
#HP #HPSupport #HPDesignJet
SUBSCRIBE: www.youtube.com/HPSupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere – every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp
This video was produced by HP.
How to Install HP DesignJet Z6 & Z9+ printer series | HP DesignJet | HP
Видео Install HP DesignJet Z6 & Z9+ printer series | HP DesignJet | HP канала HP Support
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
HP DESIGNJET Z9+ 24" Unboxing and Setup By Mark Lindquist🔥🔥Can the HP T100 large format print use other inks like ink owl plus bonus invention to help!!HP's DesignJet Z-Series Z6 and Z9+ PostScript PrintersHP Designjet 500, 800 Belt Replacement & CalibrationPrint Examples From The HP DesignJet Z6Compare HP DesignJet XL 3600 vs HP T2600 with Tony DargoBEST PRINTER - Top 6 Best Printers For Artists In 2021Install HP Gloss Enhancer Upgrade Kit for Z9+printer series | HP DesignJet | HPAmazing Ceramic Making Projects with Machines and Workers at High LevelHow to Install HP Plotter T830 on Mac !! BigSur & Catalina !! ADD Network Plotter & Printer on MAC !Large-Format Printers of Today and Tomorrow | HP DesignJet | HPPloter HP DesignJet T650 - przegląd (review)HP Designjet Z series CanvasInk Cartridges Are A ScamLarge Format Printer – 2020 Top 9Loading a Media Roll | HP DesignJet T930, T1530, and T2530 Printer Series | HP[Customer Story] Chau Digital - HP DesignJet Z9+ PrinterHP DesignJet Z6 And Z9⁺ 44 in PostScript Printer With V Trimmer V Trimmer Technology10 Awesome and Practical 3D Prints!