DIY Lure making, the INURIG soft plastic worms experiment
If there is one rig to rule them all it has be the newish Inurig, I showed some footage of this thing underwater to a fellow fisherman and he got so excited he had to lie down for while. The big drawback of the INUrig is the rigging which normally involves drinking straws and superglue, so i thought make my own bait with preinstalled guides for line with a bit of lip to hold them in the worm, I drew up and open pour worm mold with Fusion 360 a free CAD program and modified it to take the guides which i also drew up and then printed the lot on my ender 3d printer, which is a very rubbish 3d printer and it took a couple of goes to get it to print. But then using it was pretty simple and I re-melted some craw baits to cast the worm as they were a little firmer than the Normal soft plastic i use. This is my first experiment with this and it will have to wait for the summer for some sea bass, pollock or wrasse fishing, i will probably make some changes in the hook and may opt for assist hooks.
Tools and materials
Design software Fusion 360 (still available free to makers and not for Commercial use)
Ender 3 fdm printer Amazon link https://amzn.to/3M3A6cW
1.75mm PLA Filament from amazon link https://amzn.to/3BkMH5z
Medium firm Plastisol or re-melt some soft plastic lures
I used some 1.2mm spinner wire for the pins to hold the guides in the mold
4-5mm split ring to tie off the end
1/2" x 6 wood screw as a weight
Видео DIY Lure making, the INURIG soft plastic worms experiment канала The Handmade Fisherman
Tools and materials
Design software Fusion 360 (still available free to makers and not for Commercial use)
Ender 3 fdm printer Amazon link https://amzn.to/3M3A6cW
1.75mm PLA Filament from amazon link https://amzn.to/3BkMH5z
Medium firm Plastisol or re-melt some soft plastic lures
I used some 1.2mm spinner wire for the pins to hold the guides in the mold
4-5mm split ring to tie off the end
1/2" x 6 wood screw as a weight
Видео DIY Lure making, the INURIG soft plastic worms experiment канала The Handmade Fisherman
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Fishing For Monster PikePainting a fire tiger pattern wooden lureThe Minion bobberA Gopro Rig for Fishing LuresVlog 006 Swimbait Diaries, Joints and IrelandMaking a resin printed jerk bait at homeMaking a Ultra Light Leader (Trace) for Perch and Pike Lure FishingCan you make a metal fishing lure with a 3D printer?Making Reed Fishing floats (bobbers) on the hand cranked lathe part 3 of 3Making a fishing lure from a broom handle pt 2 Stick BaitSOFT PLASTIC LURE HACKS, THE THROUGH JIG STINGER HOOK RIGPainting Soft Baits the down and dirty wayMotorising a camera slider on the cheapDIY Repair: Fixing a Broken Fishing Rod!Can you catch mackerel on bare hooks?Making lures with a 3d printer, silicone paddle tailsRigging Soft Plastic Lures, the through wirevlog2 Swim bait Diaries , Scousers and the FrenchMaking a Balsa Fishing Lure (the trouble with Trout Parr)vlog 4 Swimbait Diaries, the sticky stuffHow to rig and fish big swimbaits / soft plastic paddle tail lures