2 Stage Ram Pump
This is a culmination of my 2" ram pump model that I will offering for sale https://www.ebay.com/itm/334680560643
I sell other sizes too in kit form: https://www.ebay.com/itm/334123889292
The theory is that the big ram pump makes the small ram pump behave like it's operating at much greater head heights. In this case the big pump magnifies the head height from about 6ft to 46ft. The secondary pump then amplifies 46ft to about92ft. Much tuning would be involved in just the second stage setup to get it to operate at higher ratios. As you see they are only operating at 7.6:1 (primary) and about 2:1 (secondary) ratios or about 15:1 overall.
My 2" pump while operating at 3ft head heights can achieve 20:1 all on it's own, I suspect the 2" pump with the adjustable waste valve I'm STILL working on will operate the primary pump at even greater ratios at the shown 6ft head height.
Видео 2 Stage Ram Pump канала Joe Malovich
I sell other sizes too in kit form: https://www.ebay.com/itm/334123889292
The theory is that the big ram pump makes the small ram pump behave like it's operating at much greater head heights. In this case the big pump magnifies the head height from about 6ft to 46ft. The secondary pump then amplifies 46ft to about92ft. Much tuning would be involved in just the second stage setup to get it to operate at higher ratios. As you see they are only operating at 7.6:1 (primary) and about 2:1 (secondary) ratios or about 15:1 overall.
My 2" pump while operating at 3ft head heights can achieve 20:1 all on it's own, I suspect the 2" pump with the adjustable waste valve I'm STILL working on will operate the primary pump at even greater ratios at the shown 6ft head height.
Видео 2 Stage Ram Pump канала Joe Malovich
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pretty Good House P8, Waterline InstallationPretty Good House P2, Construction Slideshowwhat to do with this old sugar shack?Workshop Knobs On The CNCA New Parking Lot LightDenailer, Put on your safety squints.Easydriver - Arduino With Stepper First MovesTime Lapse Night Drive (CHDK)pool fill rough grade completeWelder Stuck Hex Bit ExtractionA Custom Case I 3D Printed for my Thermal Camera (Old Video)A Man Outstanding In His FieldBear prints on the back porch.PGH 13, Rambling on about my wiring checklist and assorted other stuffs.Shop Progress 10 - Begin Framing The East Wall.What My Basement Has Been Up To [3d printers, YouTube, theater]A Walk Around My New PondWhat Next?Low Head Impellers Before I Ship Them.Pretty Good House P4, New Water Excavation | Joe TractorsStihl FS90R Weedwacker First Start Of The Year, How Many Pulls?