Ten Tec Model 1056 Direct Conversion Receiver, is is useable, what to do with it?
I rediscover a Ten Tec Model 1056 DC Receiver, built from a kit about 20 years ago. How good a receiver is it? And what to do with it?
Видео Ten Tec Model 1056 Direct Conversion Receiver, is is useable, what to do with it? канала Paul VK3HN
Видео Ten Tec Model 1056 Direct Conversion Receiver, is is useable, what to do with it? канала Paul VK3HN
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Simple 80M NE602 RX - Purpose of 01.uF Bypass Capacitors
#630 ME40+ Aligning the Receiver with a Spectrum Analyzer
The Art of hand-made Printed Circuit Boards
2B2C: Scratchbuilt Dual-band 2 channel QRP CW rig/ Part 6 Tx driver
RF tutorials - The Varicap or Varactor Diode
SOTA activation in VK3 with a surprise European DX caller
ten tec 1054
Scratch-built 40m 5W CW pocket transceiver
DDS controlled phasing direct conversion receiver
Building A Simple Receiver by Nick M0NTV
VK3YE's 'non-invasive' AGC circuit for BiTx40 or similar QRP rigs
DIY Front Panels
Arduino Radio
2B2C: Scratchbuilt Dual-band 2 channel QRP CW rig/ Part 5 Tx PCB, keying, pre-driver, LPFs
#11: Internals of a homemade SSB transceiver
Another 7 MHz ceramic resonator regenerative receiver (receiving DX signals)
A simple binaural direct conversion receiver
The Sudden HF RX - A simple HF receiver build
A Look At A NOS 6E5 Magic Eye Tube
The Heathkit GR-81 Economy SWL Receiver