Keep away the clunks!! -- Lubing Driveshafts on a 3rd Gen 4Runner
One of the things that is often overlooked when performing routine maintenance on a 3rd Gen 4Runner is to lubricate the driveshafts. Doing this regularly will help prevent the dreaded clunk when coming to a full stop on the road and making you wonder if you've got another issue going on. Most importantly, you should make sure you're lubricating the slip joints properly. So, in this video we go over how to get this done in detail. Hope you enjoy and thanks for watching!!
Tools:
14mm Wrench and sockets
Grease Gun
Follow me on Instagram @WeekendWrenchTurner: https://www.instagram.com/weekendwrenchturner/
--------------------------------------------------
DISCLAIMER:
Weekend Wrench Turner assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. We recommend safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Weekend Wrench Turner. Be safe while wrenching or using your vehicle!
Видео Keep away the clunks!! -- Lubing Driveshafts on a 3rd Gen 4Runner канала Weekend Wrench Turner
Tools:
14mm Wrench and sockets
Grease Gun
Follow me on Instagram @WeekendWrenchTurner: https://www.instagram.com/weekendwrenchturner/
--------------------------------------------------
DISCLAIMER:
Weekend Wrench Turner assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. We recommend safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Weekend Wrench Turner. Be safe while wrenching or using your vehicle!
Видео Keep away the clunks!! -- Lubing Driveshafts on a 3rd Gen 4Runner канала Weekend Wrench Turner
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
1999 Toyota 4runner universal joint inspection and replacement - U-JointsI've Never Done This Before! - Holley Model 1940 RebuildHow to do a Chassis Lube (Ball Joints, Tie Rods Ends, and more!) | AnthonyJ350DIY: How to Lubricate the Propeller Shaft on a 2016 4Runner TrailWe BED LINED Jason's 3rd Gen 4RUNNER and the Results are AWESOME!Toyota 4runner Buyer's Guide - Common Issues To Look Out For3rd Gen 4Runner Tundra Brake UpgradeShould you buy a Toyota 4Runner? Why is it so reliable?Part Two: Lifted 3rd gen 4runner Problems I Toyota vibration at 55 60 75 mphHow to Diagnose Truck Drive Shaft Problems - Vibrations and Noise1998 Toyota 4Runner - Rear Drive Shaft (Prop Shaft) Replacement (Change - Swap - Replace)2019 TRD Off Road Drive Shaft LubricationDiagnose Clunk #1: How to Grease a 4Runner Drive ShaftYou Need to Grease Your U-Joints if Your Toyota Clunks/Squeaks - Here's HowU-Joint ReplacementThe 4Runner Gets A Complete Lift, Wheels And Tires!!How To Grease Drive Shafts 03-09 Toyota 4Runner3rd gen 4runner ticking noise. sounds like dieselHow to Grease Driveshaft and Drain Transfer Case 4runner 4th Gen3rd Gen Toyota 4runner CV noise rattling sound