3SGE Beams Engine assembly (Breakthrough Engine with Advanced Mechanism System)

Just me being me assembling my engine in ways not recommended the Toyota factory service manual. The actual manual I have is in Japanese so that doesn't help either.

BEAMS is an acronym which stands for Breakthrough Engine with Advanced Mechanism System.

Instagram : kelvinarreola

Trying to get this back in my car so I can get back to drifty drift

In 1998, the fifth and final version of the 3S-GE was released, found only in the Japanese-delivered Altezza RS200. The 'Black Top' as it came to be referred to as, was fitted with a dual VVT-i system that adjusted timing on both intake and exhaust camshafts and came in two different spec levels dependent on which transmission it was coupled to.

Gen 5 uses electronic controlled throttle with cable (semi-drive by wire), so no idle speed controller is required. A returnless fuel rail is also used.

The MT version that came equipped with the J160 6-speed manual transmission featured larger diameter titanium intake valves measuring 35mm, larger exhaust valves measuring 29.5mm also made from titanium, a larger 33mm bucket and a compression ratio of 11.5:1. It made 210 PS (154 kW; 207 hp) at 7,600 rpm and 22.0 kg⋅m (216 N⋅m) at 6,400 rpm.

Compared to the MT version, the 5-speed AT version came equipped with the A650E 5Super ECT (with manual shift mode) automatic transmission and had a lower compression ratio of 11.1:1, a less aggressive cam profile, smaller steel-alloy valves and smaller 31mm buckets. This engine made 200 PS (147 kW; 197 hp) at 7,000 rpm and 22.0 kg⋅m (216 N⋅m) at a considerably lower 4,800 rpm. Externally, the AT model can be identified by differences in the wiring loom and the lack of an acoustic blanket on the intake plenum.

Ae86 GT86 Trueno Levin 3sge Beams SXE10 Ke70 Te72 Ae72

Видео 3SGE Beams Engine assembly (Breakthrough Engine with Advanced Mechanism System) канала kelvin arreola