Bandai Perfect Grade MS-06S ZAKU II Char's MonoEye Assembly part 1

This is just a video how the wiring should look. Ok the DC current is one way + and - On the LED the long lead is + and the short lead on the LED is - From the battery, start with + side of battery and then connect to + side of LED then so on. Make sure on the wire ends have raw wire showing about 3mm so it will contact the screws heads because the heads will contact those small rods. (Make sure to use the small silver screws) Screw down firm make sure screw head contact each rods. Use brown wire as + to LED. If you have questions just reply in the comments section. Watch the part 2 see it turned on. https://youtu.be/OthlJ5S5LvQ

Видео Bandai Perfect Grade MS-06S ZAKU II Char's MonoEye Assembly part 1 канала ISAMU 808