Discovery 3 / 4, Range Rover Sport TDV6 & TDV8 - Webasto FBH Control module: Demo 1 Prime-Start-Run

Testing the new control module on my D3. Using the 3rd button low beam lights to control it.

Easy installation. 5 wires required.
+12v batt,
Gnd,
Ignition,
W-Bus to heater,
low beam lights.

Video includes,
1.Priming for 20 seconds.
2.Starting by giving the unit a 0-5 seconds lights=on pulse + buzzer confirmation.
3.Checking if the unit is running. A start pulse whilst it is running gives 3 beeps to confirm it is running.

To follow:
Stop commands.
Diagnostic port.
Fault detection
Run duration settings, including running to a set temperature of 75 deg C.

Available to order: d3discostick@gmail.com

Видео Discovery 3 / 4, Range Rover Sport TDV6 & TDV8 - Webasto FBH Control module: Demo 1 Prime-Start-Run канала James Baker