Resin Casting with ImPRESSive Putty MIX Low Cost Simple Mold Making for Toys, Tools, Woodworking
www.ImpressivePutty.com
ImPRESSive Putty MIX is a super low cost, easy to use mold making putty.
So let’s go through how to make a mold using the ImPRESSive Putty mix, and while showing you, we’ll tell you why the ImPRESSive Putty Mix is such a nice product for your duplicating needs.
So the ImPRESSive Putty mix comes as a un-heated dough. The ImPRESSive Putty Mix is the SAME material as the ImPRESSive Putty, except you need to heat and knead it the first time you use it.
This makes the manufacturing much lower cost,
and we pass that savings on to you so the Putty Mix is lower cost than the ImPRESSive Putty or almost any mold making material out there
-and even lower cost if you reuse more than once.
So heat the Putty Mix in the microwave or any other heat source
until it is above about 200 F.
In the microwave, 3 oz takes about 30 seconds.
1 pound takes about 3 minutes.
Do not touch the putty as it will be very hot.
Use a spoon to knead the putty.
Do this one more time in the microwave and
knead one more time until it is a smooth texture.
Let this cool until you can handle it easily with your hands.
Now the ImPRESSive Putty Mix is exactly like the ImPRESSive Putty.
Both are reusable, molding putties.
Whenever you need a new mold, reheat the putty in the
microwave or any heat and reform to your new mold.
The advantages of the ImPRESSive Putty and ImPRESSive Putty Mix are
1. Reusable
2. You don’t need a mold box
3. No mixing of two parts together
4. Cools to solidify for fast mold making
5. No mold release is needed
6. Ecofriendly, and biodegradable
7. Reusable. You’ll never need another molding material.
So to make your mold with the ImPRESSive Putty,
Heat it to make it into putty, and press it over
and around your part.
It’s best to smooth out the putty first to remove any creases.
You don’t need a mold release because the Activator
that allows you to reuse the putty also acts as a release agent.
This activator can also leak out, so be sure not to
leave in your furniture or rug.
If you do leak out, use hot soapy water to clean.
When in putty form, the putty will stick to your part…
Don’t worry, when it hardens into a pliable rubber
it will not stick to most surfaces.
If you want, place your part in the freezer to cool faster.
After cooling to solidify, pull out your original
and you’re ready to make your duplicate.
Pour in 2 part resins such as urethane or epoxy.
Some clear resins do react a little with the
activator and create a whitish color on the surface.
This does not have an effect on properties other than the looks.
Adding colorants will make this a non-issue.
You can wash the Putty
with a denatured alcohol to clean off the activator,
but this will reduce the ability to remelt and reuse. If you do this, we do have more activator available if necessary.
Soap, waxes, low melt metal all can be used for the casting material along with many other options.
We even have a food safe version for chocolate molds.
To make a two part mold with the ImPRESSive Putty,
simply do one half of the mold, let that cool or even better,
chill that half in the freezer, and then press the second half of the mold.
Use a rubber band to hold the two ends sides together.
The Putty also works well with our ComposiMold, a heat and pour molding material.
Check out some of our other videos for tutorials combining the two reusable molding materials.
And of course, when you’re finished.
Remelt the Putty to make a new mold.
The ImPRESSive Putty does not
need to b re-kneaded. Just heat so it melts into a putty again.
And that’s it. ImPRESSive Putty Mix is a super awesome tool for easy mold making anything anytime. No dangerous chemicals and easy to use.
Thank you for watching and let me know what questions you have and what you would like to see next.
Soap:
Wax
ComposiCast White Epoxy Resin
Materials needed:
• ImPRESSive Putty Mix
• A shape to duplicate
• A casting material
Видео Resin Casting with ImPRESSive Putty MIX Low Cost Simple Mold Making for Toys, Tools, Woodworking канала ComposiMold Reusable Mold Making Material
ImPRESSive Putty MIX is a super low cost, easy to use mold making putty.
So let’s go through how to make a mold using the ImPRESSive Putty mix, and while showing you, we’ll tell you why the ImPRESSive Putty Mix is such a nice product for your duplicating needs.
So the ImPRESSive Putty mix comes as a un-heated dough. The ImPRESSive Putty Mix is the SAME material as the ImPRESSive Putty, except you need to heat and knead it the first time you use it.
This makes the manufacturing much lower cost,
and we pass that savings on to you so the Putty Mix is lower cost than the ImPRESSive Putty or almost any mold making material out there
-and even lower cost if you reuse more than once.
So heat the Putty Mix in the microwave or any other heat source
until it is above about 200 F.
In the microwave, 3 oz takes about 30 seconds.
1 pound takes about 3 minutes.
Do not touch the putty as it will be very hot.
Use a spoon to knead the putty.
Do this one more time in the microwave and
knead one more time until it is a smooth texture.
Let this cool until you can handle it easily with your hands.
Now the ImPRESSive Putty Mix is exactly like the ImPRESSive Putty.
Both are reusable, molding putties.
Whenever you need a new mold, reheat the putty in the
microwave or any heat and reform to your new mold.
The advantages of the ImPRESSive Putty and ImPRESSive Putty Mix are
1. Reusable
2. You don’t need a mold box
3. No mixing of two parts together
4. Cools to solidify for fast mold making
5. No mold release is needed
6. Ecofriendly, and biodegradable
7. Reusable. You’ll never need another molding material.
So to make your mold with the ImPRESSive Putty,
Heat it to make it into putty, and press it over
and around your part.
It’s best to smooth out the putty first to remove any creases.
You don’t need a mold release because the Activator
that allows you to reuse the putty also acts as a release agent.
This activator can also leak out, so be sure not to
leave in your furniture or rug.
If you do leak out, use hot soapy water to clean.
When in putty form, the putty will stick to your part…
Don’t worry, when it hardens into a pliable rubber
it will not stick to most surfaces.
If you want, place your part in the freezer to cool faster.
After cooling to solidify, pull out your original
and you’re ready to make your duplicate.
Pour in 2 part resins such as urethane or epoxy.
Some clear resins do react a little with the
activator and create a whitish color on the surface.
This does not have an effect on properties other than the looks.
Adding colorants will make this a non-issue.
You can wash the Putty
with a denatured alcohol to clean off the activator,
but this will reduce the ability to remelt and reuse. If you do this, we do have more activator available if necessary.
Soap, waxes, low melt metal all can be used for the casting material along with many other options.
We even have a food safe version for chocolate molds.
To make a two part mold with the ImPRESSive Putty,
simply do one half of the mold, let that cool or even better,
chill that half in the freezer, and then press the second half of the mold.
Use a rubber band to hold the two ends sides together.
The Putty also works well with our ComposiMold, a heat and pour molding material.
Check out some of our other videos for tutorials combining the two reusable molding materials.
And of course, when you’re finished.
Remelt the Putty to make a new mold.
The ImPRESSive Putty does not
need to b re-kneaded. Just heat so it melts into a putty again.
And that’s it. ImPRESSive Putty Mix is a super awesome tool for easy mold making anything anytime. No dangerous chemicals and easy to use.
Thank you for watching and let me know what questions you have and what you would like to see next.
Soap:
Wax
ComposiCast White Epoxy Resin
Materials needed:
• ImPRESSive Putty Mix
• A shape to duplicate
• A casting material
Видео Resin Casting with ImPRESSive Putty MIX Low Cost Simple Mold Making for Toys, Tools, Woodworking канала ComposiMold Reusable Mold Making Material
Показать
Комментарии отсутствуют
Информация о видео
12 апреля 2021 г. 0:57:24
00:05:09
Другие видео канала
![ComposiMold Mold Making & ComposiStone Hard Plaster for Crafts, Jewelry, Art Low Cost, Reusable](https://i.ytimg.com/vi/q3negUS_53I/default.jpg)
![Casting Plaster of Paris in a Mold You Make. Adding Plaster Additive for Increased Strength](https://i.ytimg.com/vi/HSIo5q6fKQ4/default.jpg)
![How to Make Molds with ComposiMold and ImPRESSive Putty, THE Lowest Cost Mold Making Option](https://i.ytimg.com/vi/taifOKyF56s/default.jpg)
![Low Cost, Reusable Mold Making Anytime You Want. See it in Action](https://i.ytimg.com/vi/KLCr1nRcMDc/default.jpg)
![Lowest Cost Reusable Mold Making Material Using the IMPRESSIVE PUTTY MIX](https://i.ytimg.com/vi/i1KJ_HcFPdI/default.jpg)
![Making Your Own Silicone Ring in ComposiMold using a PLA Plastic 3D Printed Ring](https://i.ytimg.com/vi/l1_pD8-Gf6s/default.jpg)
![Making Ornamental Decals with Sculpey Polymer Clay and a Reusable Molding Putty ImPRESSive Putty](https://i.ytimg.com/vi/6dDMn5oYoj4/default.jpg)
![Low Melt Metal Toy Hand Casting Process-This Mold Making Can Be Used with Many Different Materials](https://i.ytimg.com/vi/zWB2Sf20aMo/default.jpg)
![Easy Low Cost Mold Making for Epoxy and Silicone](https://i.ytimg.com/vi/jwjcO2djbh4/default.jpg)
![Candle Making at Home For Beginners and Candle Making Business Soy Candle or Beeswax Candle](https://i.ytimg.com/vi/CTAlknAvq4s/default.jpg)
![Making a Simple Plug Jig for Removable Hole Plug using ImPRESSive Putty Woodworking Tricks](https://i.ytimg.com/vi/18xlTzTuGMs/default.jpg)
![Recycle Crayons into Awesome Wax Art Shapes](https://i.ytimg.com/vi/kppNy_Sn-vA/default.jpg)
![DIY Garden Sculpture with Mold Making](https://i.ytimg.com/vi/Nj-aZP3LgT4/default.jpg)
![How to Do Metal Casting at Home Using the Lost Wax Process (Or Lost ComposiMold)](https://i.ytimg.com/vi/6fTn6I9Fvk0/default.jpg)
![Duplicating Mini Figurine Toys Using ImPRESSive Putty Resin Warhammer, Dungeons and Dragons, LEGO](https://i.ytimg.com/vi/XPUv4EMBpXE/default.jpg)
![How to Make Beeswax Candle with ComposiMold](https://i.ytimg.com/vi/-qYvPknP2VY/default.jpg)
![Duplicating Mini Figurine Toys Using ImPRESSive Putty Resin Warhammer, Dungeons and Dragons, LEGO](https://i.ytimg.com/vi/cdsp2CRpdR0/default.jpg)
![How To Duplicate a 3D Printed Treasure Chest With ImPRESSive Putty Mix (Aquarium, mini-fig terrain)](https://i.ytimg.com/vi/iPDaXBIwzKU/default.jpg)
![EcolureMaker Soft Bait Fishing Lure for Bass. Beat the SENKO. And catch the big fish.](https://i.ytimg.com/vi/yGfTxlAf2r8/default.jpg)
![Complex Hollow Parts Mold Making sing Bubbleisha Shopkins Gumball and ComposiMold](https://i.ytimg.com/vi/qCVhvk2j7ik/default.jpg)