Automatic Smart Plant Pot - (DIY, 3D Printed, Arduino, Self Watering, Project)
Print, assemble and program your own intelligent Smart Plant Pot. With a hidden water reservoir, pump and sensors why not make your plant care easy.
👇 More info below 👇
With an Arduino Nano at its core this project uses a water level sensor to let you know when to refill the concealed tank and a solid moisture sensor to figure out when to water your plant based on its needs.
==========
CORRECTION: 4:05 into the video I incorrectly say to use 20cm wires to connect the water level sensor. The correct length is 35cm.
List of items used in this project and where to find them:
■ Arduino Nano: https://geni.us/ArduinoNanoV3
■ Mini submersible pump: https://geni.us/MiniPump
■ 5mm tubing: https://geni.us/5mmTubing
■ Transistor: https://geni.us/2npn2222
■ Resistors (1k and 4.7k): https://geni.us/Ufa2s
■ Wire: https://geni.us/22AWGWire
■ 3mm LED: https://geni.us/LEDs
■ Water level sensor: https://geni.us/WaterLevelSensor
■ Nuts and Bolts: http://geni.us/NutsAndBolts
■ Soil moisture sensor: https://geni.us/MoistureSensor
■ Half Perma-proto board: https://geni.us/HalfPermaProto
■ PLA Filament: https://geni.us/PLAFilament
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Battery powered soldering iron: http://bit.ly/SealeySDL6
==========
The code can be downloaded from here: https://github.com/DIY-Machines/SmartPlantV1
3D printed parts and wiring diagram can be downloaded from here: https://www.thingiverse.com/thing:3537287
==========
SAY THANKS:
Buy me a coffee to say thanks: https://ko-fi.com/diymachines
Support us on Patreon: https://www.patreon.com/diymachines
SUBSCRIBE:
■ https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: https://discord.gg/EhqqePPcKk
INSTAGRAM: https://www.instagram.com/diy_machines/?hl=en
FACEBOOK: https://www.facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: https://www.patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: https://geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
Aputure MC: https://geni.us/FAPGL
RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Видео Automatic Smart Plant Pot - (DIY, 3D Printed, Arduino, Self Watering, Project) канала DIY Machines
👇 More info below 👇
With an Arduino Nano at its core this project uses a water level sensor to let you know when to refill the concealed tank and a solid moisture sensor to figure out when to water your plant based on its needs.
==========
CORRECTION: 4:05 into the video I incorrectly say to use 20cm wires to connect the water level sensor. The correct length is 35cm.
List of items used in this project and where to find them:
■ Arduino Nano: https://geni.us/ArduinoNanoV3
■ Mini submersible pump: https://geni.us/MiniPump
■ 5mm tubing: https://geni.us/5mmTubing
■ Transistor: https://geni.us/2npn2222
■ Resistors (1k and 4.7k): https://geni.us/Ufa2s
■ Wire: https://geni.us/22AWGWire
■ 3mm LED: https://geni.us/LEDs
■ Water level sensor: https://geni.us/WaterLevelSensor
■ Nuts and Bolts: http://geni.us/NutsAndBolts
■ Soil moisture sensor: https://geni.us/MoistureSensor
■ Half Perma-proto board: https://geni.us/HalfPermaProto
■ PLA Filament: https://geni.us/PLAFilament
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Battery powered soldering iron: http://bit.ly/SealeySDL6
==========
The code can be downloaded from here: https://github.com/DIY-Machines/SmartPlantV1
3D printed parts and wiring diagram can be downloaded from here: https://www.thingiverse.com/thing:3537287
==========
SAY THANKS:
Buy me a coffee to say thanks: https://ko-fi.com/diymachines
Support us on Patreon: https://www.patreon.com/diymachines
SUBSCRIBE:
■ https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: https://discord.gg/EhqqePPcKk
INSTAGRAM: https://www.instagram.com/diy_machines/?hl=en
FACEBOOK: https://www.facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: https://www.patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: https://geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
Aputure MC: https://geni.us/FAPGL
RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Видео Automatic Smart Plant Pot - (DIY, 3D Printed, Arduino, Self Watering, Project) канала DIY Machines
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Meaningful uses of 3D Printing in Gardening](https://i.ytimg.com/vi/71-nQTSJ17Q/default.jpg)
![3D Printed Concrete Planter Mold / Anet A6 / Molde Maceteros de Cemento impresos en 3D](https://i.ytimg.com/vi/f5ssOHKA1rI/default.jpg)
![#207 Why most Arduino Soil Moisture Sensors suck (incl. solution)](https://i.ytimg.com/vi/udmJyncDvw0/default.jpg)
![Wi-Fi Plant Watering System (with Particle Photon)](https://i.ytimg.com/vi/_ysQVpQog3I/default.jpg)
![Automating a Greenhouse with LoRa! (Part 1) || Sensors (Temperature, Humidity, Soil Moisture)](https://i.ytimg.com/vi/2YJHcGQnpAk/default.jpg)
![Arduino Garden Controller - Automatic Watering and Data Logging](https://i.ytimg.com/vi/O_Q1WKCtWiA/default.jpg)
![TOP 20 Creative Arduino Projects for new ideas in 2021](https://i.ytimg.com/vi/0SW7fvBpJGI/default.jpg)
![This Plant Pot is SMART and backed by Xiaomi 🔥](https://i.ytimg.com/vi/z1NqVqu-uUE/default.jpg)
![How to Make a Modular 3D Printed Hydroponic System](https://i.ytimg.com/vi/Ak4sb-nRAcE/default.jpg)
![DIY Levitating Planter - 3D printed version](https://i.ytimg.com/vi/xnZV5N6OOio/default.jpg)
![3D Printing a Self Watering Planter and Getting Help from Anne Of All Trades](https://i.ytimg.com/vi/qqzkHj1N508/default.jpg)
![Smart IOT Pet Planter](https://i.ytimg.com/vi/VA2ZSpLNxak/default.jpg)
![My Automated Plant Watering System](https://i.ytimg.com/vi/9Fx9zQJe3H4/default.jpg)
![DIY Reservoir Gauges | Making water level indicators - Semi-Hydro & Self-Watering pot hack!](https://i.ytimg.com/vi/fRa8enRoEQI/default.jpg)
![Making a 3d printable hydroponics system for my window sill](https://i.ytimg.com/vi/FEDWGKrZ9ns/default.jpg)
![How to build an Arduino based DIY 3D Printed Robotic Bartender - Part 1](https://i.ytimg.com/vi/NBvXknwVfaI/default.jpg)
![10 3d prints to make your garden more enjoyable #3dprinting](https://i.ytimg.com/vi/-MbVXXDbQIY/default.jpg)
![Arduino Plant Watering System - Complete guide](https://i.ytimg.com/vi/JdvnfENodak/default.jpg)
![IOT Smart Plant Monitoring System | Smart Irrigation](https://i.ytimg.com/vi/OL7TNx9RquE/default.jpg)
![SOIL MOISTURE SENSOR FOR PLANTS (V1.2 / V2.0) - Arduino tutorial #31](https://i.ytimg.com/vi/pFQaFnqpOtQ/default.jpg)