MESA/Boogie Stowaway and Highwire In-Depth Video & Comparison

Introducing… The MESA Stowaway & Highwire Input and Output Buffers!

In today’s pedal-heavy era, cabling, pedal designs, pedalboard layouts and rig concepts all conspire to create a loss of tone right where your signal chain starts. In almost 50 years of building high performance amplifiers we’ve learned that every single part in the signal path ultimately is a “Tone control”. With this in mind, we set out to design and build the ultimate Signal Management products to stabilize and optimize your guitar, pedalboard and amplifier connections. 

http://mesaboogie.com/signal-management/buffers-line-drivers-line-balancing/index.html

Stowaway Input Buffer -
http://mesaboogie.com/signal-management/buffers-line-drivers-line-balancing/stowaway-input-buffer.html

The Stowaway provides the stable, consistent load your instrument needs to sound as intended as well as converting your signal to low impedance to reduce your exposure to tonal losses caused by cable capacitance, pickup loading, impedance mismatches and resonant/peak frequency changes due to varying pedal input designs. Built-in RFI circuitry also provides immunity from cell phone and radio interference. and the small footprint allows for convenient mounting above or below your pedalboard. The affordability makes this unit a must-have to protect the tonal investment in your favorite guitars, amp’s and your pedalboard… unless… you find use for the Highwire!

Highwire Dual Input/Output Buffer and Output Line Driver -
http://mesaboogie.com/signal-management/buffers-line-drivers-line-balancing/highwire-dual-buffer-output-boost.html

This all-in-one Buffer/Boost/Line Driver utilizes the Stowaway’s exceptional Input buffer and RFI circuitry as it's foundation while also providing excellent Output Buffer and Line Drive functionality. Combining the two creates a fully buffered ‘FX Loop’ for the pedals on your board and your entire signal chain. The Highwire also provides an adjustable, foot-switchable boost with up to +22dB of increase that can be great for a solo function or used as an input clean boost/overdrive on your favorite tube amp. Also included is a fully buffered tuner output with a mute function (accessible by pressing and holding the boost switch). Finally, the output buffer can be set for unity output at 0dB, or – add +3dB of buffered boost for longer cable runs or to have your output signal hit your amp’s input a little hotter than unity gain. The Highwire represents the maximum buffer value and optimization in a single package with complete coverage to make any gutar/pedalboard/amp signal chain the very best it can be.

These solutions have been created with one goal in mind; ensuring your Tone is the very best it can be.

Recorded with a Nash Guitars S-Model with Lollar pickups in the neck position into Ch. 1 of a JP-2C head and a 2x12 Rectifier Compact loaded with Celestion Vintage 30 speakers. Captured with a Shure SM57 and the CabClone in Open-Back position and blended 55% SM57 & 45% CabClone with no additional EQ or post production processing.

Please feel free to contact us with any questions you may have on buffering, rig and pedalboard building, or any other Mesa questions you may have. We look forward to helping you and thanks for your support.

Видео MESA/Boogie Stowaway and Highwire In-Depth Video & Comparison канала MESA/Boogie