Stuart No.1 Steam Engine. Part 3 of 3.
Building a Stuart No.1 steam engine from scratch. Part 3 of 3: Valve chest, slide valve, valve rod, eccentric straps, eccentric rod.
Mounting the piston and running the machine with compressed air.
Видео Stuart No.1 Steam Engine. Part 3 of 3. канала LSCAD
Mounting the piston and running the machine with compressed air.
Видео Stuart No.1 Steam Engine. Part 3 of 3. канала LSCAD
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Stuart No.1 Steam Engine. Part 1.
Make a Miniature Steam Locomotive Series ( Cylinder Internals Part 4 Slide Valves ) "mr factotum"
#MT32 Part 19 - Making a Stuart Half Beam Steam Engine. Painting and Final Run. By Andrew Whale.
Stoßkopf für Fräsmaschine Wabeco F1200
STUART NUMBER ONE STEAM ENGINE REPAIR - PART #1
Building the Stuart Turner Number 8 Mill Engine - Part 1
Homemade Lathe steady rest (for a 100+ years old lathe) (using only a lathe)
Steam Locomotive 9F Build Part 49 - Return Cranks
Making a 'simple' beam engine from castings
Bevel Gears Milling.
Stuart No.1 Steam Engine. Part 2.
Stuart 501 Boiler
Nocken fräsen für Verbrennungsmotor. Part 2: ruckfreier Nocken.
Stuart Beam Engine
#MT32 Part 2 - Making a Stuart Half Beam Steam Engine. Machining the Flywheel. By Andrew Whale.
Nocken drehen für Verbrennungsmotor.
Bohrer schleifen
Stuart No. 1 Dampfmaschine. Part 2.
#MT22 Part 1 - Making a Stuart S50 Engine Soleplate / Bedplate and Bearings. By Andrew Whale.