Li-ion Balancing and Protection Board BMS SIMULATION (How it Works)
Channel Support - https://www.paypal.com/paypalme/evcustoms?locale.x=en_US
EV-Customs Website - http://ev-customs.com
Instagram - https://www.instagram.com/ev_customs/
Facebook - https://goo.gl/tu3Qdk
Music - Joakim Karud
The Orion Battery Management System (BMS) performs three primary functions:
It protects the battery pack from being over-charged (cell voltages going too high) or over-discharged (cell voltages going too low) thereby extending the life of the battery pack. It does this by constantly monitoring every cell in the battery pack and calculating exactly how much current can safely go in (source, charge) and come out (load, discharge) of the battery pack without damaging it. These calculated current limits are then sent to the source (typically a battery charger) and load (motor controller, power inverter, etc), which are responsible for respecting these limits.
It calculates the State of Charge (the amount of energy remaining in the battery) by tracking how much energy goes in and out of the battery pack and by monitoring cell voltages. This value can be thought of as a fuel gauge indicating how much battery power is left in the pack.
It monitors the health and safety of the battery pack by constantly checking for shorts, loose connections, breakdowns in wire insulation, and weak or defective battery cells that need to be replaced.
There are also secondary functions that the BMS performs:
Balances all the cells in the battery pack by intelligently bleeding off excess energy from cells that are charged more than others. This provides the maximum amount of usable energy (capacity) from the battery pack since the pack is only as strong as the weakest cell.
Monitors the temperature of the battery pack and controls a battery fan to regulate the temperature of the pack. Additionally, it constantly monitors the output of the fan to make sure it is working properly.
Provides real-time information and values to other devices such as motor controllers, chargers, displays and data loggers using several different methods (CANBUS, analog outputs, and digital outputs).
Stores error codes and comprehensive diagnostic information to aide in fixing problems with the battery pack should any issues arise.
Видео Li-ion Balancing and Protection Board BMS SIMULATION (How it Works) канала EV - Customs
EV-Customs Website - http://ev-customs.com
Instagram - https://www.instagram.com/ev_customs/
Facebook - https://goo.gl/tu3Qdk
Music - Joakim Karud
The Orion Battery Management System (BMS) performs three primary functions:
It protects the battery pack from being over-charged (cell voltages going too high) or over-discharged (cell voltages going too low) thereby extending the life of the battery pack. It does this by constantly monitoring every cell in the battery pack and calculating exactly how much current can safely go in (source, charge) and come out (load, discharge) of the battery pack without damaging it. These calculated current limits are then sent to the source (typically a battery charger) and load (motor controller, power inverter, etc), which are responsible for respecting these limits.
It calculates the State of Charge (the amount of energy remaining in the battery) by tracking how much energy goes in and out of the battery pack and by monitoring cell voltages. This value can be thought of as a fuel gauge indicating how much battery power is left in the pack.
It monitors the health and safety of the battery pack by constantly checking for shorts, loose connections, breakdowns in wire insulation, and weak or defective battery cells that need to be replaced.
There are also secondary functions that the BMS performs:
Balances all the cells in the battery pack by intelligently bleeding off excess energy from cells that are charged more than others. This provides the maximum amount of usable energy (capacity) from the battery pack since the pack is only as strong as the weakest cell.
Monitors the temperature of the battery pack and controls a battery fan to regulate the temperature of the pack. Additionally, it constantly monitors the output of the fan to make sure it is working properly.
Provides real-time information and values to other devices such as motor controllers, chargers, displays and data loggers using several different methods (CANBUS, analog outputs, and digital outputs).
Stores error codes and comprehensive diagnostic information to aide in fixing problems with the battery pack should any issues arise.
Видео Li-ion Balancing and Protection Board BMS SIMULATION (How it Works) канала EV - Customs
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
BMS (Battery Management System) || DIY or Buy || Properly protecting Li-Ion/Li-Po Battery PacksHow to Make Perfect Balance on lithium Batteries with BMS Board (Animation)Lithium batteries for beginners. Step by step: balancing, assembling, capacity test. LiFePo4 DIY.What is a Battery Management System?What is a Battery Management System? | Topologies of the BMS3s Li-ion BMS/Protection Board TestingLithium Battery Cell Balancer Explained charger 18650 and BMSBattery Management System / BMS Circuit Diagram DesignComo renovar las baterías de tu viejo taladro por unas de litioBalancing unit (BMS) for Li-ion batteriesHow to Make 2S 3S 4S Battery from 18650 batteriesHow does a BMS (Battery Management System) work? | Passive & Active cell balancing ExplainedBattery Cell Balancing and State of Charge (SOC) EstimationSmart BMS Bluetooth - how to perform cell voltage calibrationHow to build an 18650 Lithium Battery Pack with BMS.Smart BMS Bluetooth - Battery Management System smart opensourceDIY Lithium Battery "Active Cell Balancer" Explained and Tested. Great for LiFePO4!How to add BMS (no spot-weld Vruzend DIY 18650 battery kit)Battery Management System. What is a BMS realy doing?