Geomagic Design X - Stamping Die Reverse Engineering
Tips & Tricks (Stamping Die): Are you in need to repair some of your #Mold & #Dies but do not have CAD data to run the CNC Machine or Inspect your part of Wear?
This video shows a few Reverse Engineering #SurfaceModeling Techniques using 3D Systems Geomagic #DesignX software such as Loft, Trim Surface, Manual Spline creation. See dedicated tools like #MeshFit to automate the creation of Surfaces. This data was later LiveTransfer via Parametric Model to Dassault Systèmes #Solidworks and Siemens #NX. Estimated time of Modeling was 4.5 hours
Download a free copy of this video below:
https://3dsystemsinc.box.com/s/hhp0xhvx21bg48kaazdd2wco141qrapu
For questions or comments ping me at: orlando.ruiz@3dsystems.com 3D Systems Corporation 3DCAD Portal Cimatron
Видео Geomagic Design X - Stamping Die Reverse Engineering канала Orlando Ruiz
This video shows a few Reverse Engineering #SurfaceModeling Techniques using 3D Systems Geomagic #DesignX software such as Loft, Trim Surface, Manual Spline creation. See dedicated tools like #MeshFit to automate the creation of Surfaces. This data was later LiveTransfer via Parametric Model to Dassault Systèmes #Solidworks and Siemens #NX. Estimated time of Modeling was 4.5 hours
Download a free copy of this video below:
https://3dsystemsinc.box.com/s/hhp0xhvx21bg48kaazdd2wco141qrapu
For questions or comments ping me at: orlando.ruiz@3dsystems.com 3D Systems Corporation 3DCAD Portal Cimatron
Видео Geomagic Design X - Stamping Die Reverse Engineering канала Orlando Ruiz
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Geomagic Design X - Shovel Modeling (Modelado de Pala)
3D Scan Data to CAD Model Using Geomagic Design X
Design X overview
Reverse engineering of a car rim with Kreon Ace scanning arm and Geomagic DesignX
Geomagic Design X - Carcasa Bomba de Agua (Pump Housing)
Geomagic Desing X Tutorial: Racing Helmet modeling process
What is Reverse Engineering with Surface Modeling?
ANSYS SpaceClaim Reverse Engineering | CAE Associates
NX Progressive Die Wizard (PDW) : STEP 01 - Create Intermediate Stage
Reverse Engineering A Compressor Using 3D Scan & Geomagic Design X
Geomagic Design X 2016 - Scan Data to Solid Model
Geomagic Design X - Pump Housing Reverse Engineering Process
Geomagic Design X - Plant Modeling Tank and Piping (Pipe Wizard)
Tool Shaft Reverse Engineering Design X Demo
Geomagic Design X Surface Modeling
Surface Modeling a Mouse in Geomagic Design X
Geomagic Design X - Helical Gear Modeling (Engrane)
Geomagic Design X - Surface Modeling
Geomagic Design X Tutorial Reverse Engineering a Blisk
Quality Control Inspection from 3D Scanning Data with Geomagic Design X