Ford f250 351W 5.8l w/Mods
This is my 1997 F250 HD 2WD, the last of the square body's. Like if you like.
Idle @ 11:35
Rev @ 12:35
10-90 MPH @ 13:10
Runs a 15.8 ET in the quarter with a rolling start because of wheel hop. I will be getting a new time soon as I can and I am hoping to drop up to a second. When I get ladder bars I'll be able to do a hard launch and that should drop some time too.
*Notice, during the revving of engine, the blue must be a camera glare through the moisture, because the engine doesn't burn any oil and I never see any blue coming out of the exhaust.
351w 5.8L Multiport EFI
5 Speed
10.5" Limited Slip Rear End
Factory Roller Cam
Edelbrock Performer Intake
Twin 61MM BBK Throttle Body
Dual Cone Air Filters (now have K&N here http://www.youtube.com/watch?v=W0SWC7PIeac)
Short "Straight Pipe" Exhaust After the Cat
Next upgrades in planned order:
1) Ladder bars (NOW have traction bars here! https://www.youtube.com/watch?v=mnhonN69vyQ
2) Body work
3) Methanol injection
4) Zex Wet kit, planned 75 shot, hence the methanol injection.
5) Find a dynomax, powerdyne, or vortech SC kit.
6) Remote Turbo?
7) Just trying to reach MAX safe block potential of 500 RWHP.
Thanks.
Видео Ford f250 351W 5.8l w/Mods канала Azone123465
Idle @ 11:35
Rev @ 12:35
10-90 MPH @ 13:10
Runs a 15.8 ET in the quarter with a rolling start because of wheel hop. I will be getting a new time soon as I can and I am hoping to drop up to a second. When I get ladder bars I'll be able to do a hard launch and that should drop some time too.
*Notice, during the revving of engine, the blue must be a camera glare through the moisture, because the engine doesn't burn any oil and I never see any blue coming out of the exhaust.
351w 5.8L Multiport EFI
5 Speed
10.5" Limited Slip Rear End
Factory Roller Cam
Edelbrock Performer Intake
Twin 61MM BBK Throttle Body
Dual Cone Air Filters (now have K&N here http://www.youtube.com/watch?v=W0SWC7PIeac)
Short "Straight Pipe" Exhaust After the Cat
Next upgrades in planned order:
1) Ladder bars (NOW have traction bars here! https://www.youtube.com/watch?v=mnhonN69vyQ
2) Body work
3) Methanol injection
4) Zex Wet kit, planned 75 shot, hence the methanol injection.
5) Find a dynomax, powerdyne, or vortech SC kit.
6) Remote Turbo?
7) Just trying to reach MAX safe block potential of 500 RWHP.
Thanks.
Видео Ford f250 351W 5.8l w/Mods канала Azone123465
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
1992-1997 OBS Ford Truck 5.8L Air Pump Smog Pump Delete F-150, F-250, F-350351 Small Block Dyno Shootout: Windsor vs Cleveland - HorsePower S16, E11HOW TO INSTALL COLD AIR INTAKE ON A 95 FORD F250 5.8 **QUICK AND SIMPLE**351 Windsor Budget Build, No Machine Shop!EGR DELETE!! - Ford 351 Windsor EFIFord Bronco 351W upgrades - 5th gen Bronco Specs and Upgrades DetailsFord Truck EGR System - Complete OVERVIEW and TEST - Step by Step!!1995 F150 Erratic Idle Part 1What to Look for When Buying a 1980-96 F15092 F250 351W EFI to Carb ConversionFord E150 351 V8 stutter stall issue.wmv351 Windsor – What You Need to Know About the Ford 351w Small Block [5.8 Liter]Tearing Down a Pair of 351 Small Blocks: Windsor vs Cleveland - HorsePower S16, E10F150 302 carb swap EFI to Carburetor500+hp 351W Stroker BuildDIY Throttle Position Sensor Change (86-96 V8 Ford Trucks)OBS F250 gets LED dash lights!LOW$-JUNKYARD 351W-BETTER THAN 5.0L?460 F350 Better mpg and power intake modOBS Ford F250 Build Timelapse