Analog Mixer Basics (How to Use An Analog Mixer)
A basic walk through of an analog mixer, mixing desk or mixing console commonly found in live PA systems, church systems, podcasting, broadcasting and recording.
Specifically, the Behringer Xenyx QX2442 USB.
Mic Used: Sennheiser e835
Interface: Behringer UMC 404 HD
Camera: Canon SL2
Proclaim Theme Produced by Michael Lining
https://www.youtube.com/user/mjohn911
0:00 - 0:59 - Introduction
1:00 - 2:01 - Signal Flow
2:02 - 3:19 - Mixer Channel Inputs and Inserts
3:20 - 5:14 - Setting Your Mixer Gain or Trim
5:15 - 7:42 - Low Cut, High Pass Filter, Bass Roll Off, Rumble Filter
7:43 - 8:50 - One Knob Compressor Demonstration
8:51 - 10:12 - EQ and Sweepable EQ Demonstration
10:13 - 11:26 - How to set your equalizer or EQ
11:27 - 12:01 - Pan Demonstration
12:02 - 12:50 - Mixer Mute or Channel On Off Button
12:51 - 13:49 - Clip Light, Clipping Demonstration
13:50 - 14:30 - Solo Light
14:31 - 18:37 - Subgroup or Sub Mix Routing and Assignment
18:38 - 18:53 - Main Mix Faders or Sliders
18:54 - 19:49 - Aux Mix or Monitor Mix
19:50 - 21:56 - Pre Fader Mix vs. Post Fader Mix
21:57 - 23:13 - FX Aux used for Monitors Instead (See Part 2 of this video for FX routing)
23:14 - 24:25 - Conclusion - Don't Forget Part 2 :)
Видео Analog Mixer Basics (How to Use An Analog Mixer) канала Proclaim AV
Specifically, the Behringer Xenyx QX2442 USB.
Mic Used: Sennheiser e835
Interface: Behringer UMC 404 HD
Camera: Canon SL2
Proclaim Theme Produced by Michael Lining
https://www.youtube.com/user/mjohn911
0:00 - 0:59 - Introduction
1:00 - 2:01 - Signal Flow
2:02 - 3:19 - Mixer Channel Inputs and Inserts
3:20 - 5:14 - Setting Your Mixer Gain or Trim
5:15 - 7:42 - Low Cut, High Pass Filter, Bass Roll Off, Rumble Filter
7:43 - 8:50 - One Knob Compressor Demonstration
8:51 - 10:12 - EQ and Sweepable EQ Demonstration
10:13 - 11:26 - How to set your equalizer or EQ
11:27 - 12:01 - Pan Demonstration
12:02 - 12:50 - Mixer Mute or Channel On Off Button
12:51 - 13:49 - Clip Light, Clipping Demonstration
13:50 - 14:30 - Solo Light
14:31 - 18:37 - Subgroup or Sub Mix Routing and Assignment
18:38 - 18:53 - Main Mix Faders or Sliders
18:54 - 19:49 - Aux Mix or Monitor Mix
19:50 - 21:56 - Pre Fader Mix vs. Post Fader Mix
21:57 - 23:13 - FX Aux used for Monitors Instead (See Part 2 of this video for FX routing)
23:14 - 24:25 - Conclusion - Don't Forget Part 2 :)
Видео Analog Mixer Basics (How to Use An Analog Mixer) канала Proclaim AV
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Analog Mixer Basics Part 2 (How to Use An Analog Mixer)A Complete Recording Process - tracking, mixing, masteringYamaha MG20XU mixer training part oneUnderstanding Frequency & How to Use An Equalizer (EQ)How To Setup A Sound SystemAudio Connectors and ConnectionsDigital Mixer vs Analog Mixer – What's the Difference? | Live Sound Lesson 🎛How to Set Up a PA System for a BandHow to use a Behringer UB2222FX-PRO mixer for live sound reinforcementMixing Analog Off Tape, No Computer. Riot Home Recording.How to EQ VocalsHow to connect an active subwoofer to a sound reinforcement systemHow to use a Behringer 1204FX mixer for live sound reinforcementAudio Interface vs Mixer - What is the Difference?Using a MIXING DESK - the basics and what you need to know.How to set gain on the mixing console4 Reasons to Have a Mixer in Your Home StudioHow Audio Mixers Work – What is a Mixer & What Does it Do? | Live Sound LessonAux and Groups Explained in less than 11 MinutesSound Systems For Beginners. My Favorite MIXER Solution By Scott Grove